Aventura 43

General

• Yard is Centreboard (HU)
• Lay out A is for the first boat, we have those drawings as a reference, see inbox/00-2D PROJECT X.dwg
• Lay out B is our boat (the second), it is a charter version with 8 berths
• Not all space is used when it is inefficient or hard to reach for use
• Furniture is prefabricated outside the boat as much as possible, furniture enters the boat via a cut out in the aftdeck of 1400x1200, for boat #4 this cutout will be 1400x1400
• Yard manager used to draw CNC building kits himself in 2D AutoCad
• Sheets are nested full, if possible move parts to another material in order to obtain this
• Carpenters are supposed to assemble the interior without drawings (only reference are the codes)
• access behind joinery - every space needs to be accessible for cleaning (to remove construction debris which might block bilgepumps)

Origin

At intersection of DWL and F32

Material

• see CNC interiors - work procedure

• Plywood birch 3030x1245mm - density 600 kg/m3
• HPL density - 1.4 kg /m2 for 1mm thickness
  • 15mm + 2x HPL 0.75mm draw 17mm
    • sole
    • furniture
    • seats
  • 9mm + 2x HPL 0.75mm draw 11mm
  • 4mm + 1x HPL 0.75mm (Abet 661) draw 5mm
    • lining panels glued to steel construction
  • 4mm + 2x HPL 0.75mm draw 6mm
    • furniture backpanels

Colours

• Abet 661 Micro - walls, lining, furniture bodies
• Abet 313 Nut - furniture doors
• 2x white backing - where no colour is required
• white - all backing
• Vescom is glued with foam on white panel

Upholstery

• matress thickness 120mm
• sole covering is carpet (loose)

Hardware

• Hinges
  • concealed hinge full overlay - Hettich Sensys 8645i - TH 55 FIX (110° opening) - Hettich 9 071 220
  • concealed hinge inset - Hettich Sensys 8645i - TH 55 FIX (110° opening) - Hettich 9 071 222
  • screw-on cross mounting plate - Hettich System 8099 - Distance 0,0mm - Hettich 9 071 670
  • screw-on cross mounting plate - Hettich System 8099 - Distance 5,0mm - Hettich 9 071 673
• Push button - Southco Marine MP-05-H21-F3-K3 (supplier Kroon)
• supplier is Medomat (Ostermann)

Insulation

• PU foam
• thickness:
  • shell 40-50mm
  • structure 10mm (can be cut away where necessary)
• in general keep some space between furniture and insulation

Appliances

• toilet - Planus Sky 560
• heating by Warmteservice Zwolle
  • T: 038-467 15 20
  • E: zwolle@warmteservice.nl
  • contact person (shop manager): Job van Hoogmoed
  • convector grill: search on supllier website for 'sierrooster'

Electrical installation

• see layer '00-E-SCHEMA-24V' and '00-E-SCHEMA-230V'

Sole

• 4mm rubber above enginer room only, all other sole panels are directly on steel construction
• levels (measured to underside of solepanel):
  • foreship DWL -280
  • midship DWL +559
  • aftship DWL -259
• sole only where necessary, continue 20mm beyond bhd (for 20x20 slat)
• sole stops against wet units

Ceilings

• 17mm basewood is mounted against all frames (see layer 1-BET-DS*)
• thickness ceiling strips 13mm - see layer '0A-PLAFONDPLATEN'
• aft cabin has an addtional base panel of 9mm because of girders

Port hole boxes and curtain pockets

• curtain pockets
  • depth 75mm
  • lining is 8mm and comes with porthole see layer frees Berken Naturel 04 (myst be 8mm)
• porthole boxes
  • material of sides is 15mm + 2x HPL 0.75mm (draw 17mm)
  • sides to have 10mm overlength at hull side
  • porthole panel against steel is 9mm + 2x HPL 0.75mm (draw 11mm)

Wet units

• completed outside the boat, including sole
• resting directly on the steel
• ceilings are round, 17mm, cuts in top to help bending
• furniture doors
  • doors + bulkhead cutouts are rectangular
  • door seam is 2mm
  • door and bulkhead edge finish is paint

Doors

Doorleafs (30mm) not in building kit, will be cut by yard

Part codes

• 5 horizontal layers:
  • H1 sole
  • H2 intermediary
  • H3 seat
  • H4 intermediary
  • H5 ceiling

• 4 vertical segments:
  • V1 on top of H1
  • V2 on top of H2
  • V3 on top of H3
  • V4 on top of H4

• Compartments
  • AK aft cabin (achterkajuit)
  • VK fore cabin (voorkajuit)
  • SH wheelhouse (stuurhuis)

• Furniture
  • KN galley (keuken)
  • SF settee (sofa)

• Partnumbers
  • assigned clockwise

• Layer use in 2D Autocad
  • DS = section (doorsnede)
  • US = expansion (uitslag)
  • ST = steel (staal)
  • 2 = layout 2
  • FR = frame (spant)

• example: 2-BET-US-AK-WC-H1-01 = Layout 2, BETimmering-UitSlag-AchterKajuit-WC-Vloer H1, deel 01.

Remarks Cabin 1 (forepeak)

• V-berth with filling piece to make it a double berth
• level berth as layout A, box under bed can be copied (layer 1-BET-US: VK-H2-01, 03 and 04, VK-V1-06, VK-V1-07 and VK-V2-04, see also drawing VK-Agy allat (sounds Hungarian..)
• box under berth should be the same because of battery for bow thruster
• if possible use same wardrobes and shelf as in layout A: 1-BET-US-VK-K3-01 and 03 UPDATE: wardrobes must be modified for layout-A and will not fit in layout-B
• locker in forepeak bhd as in layout-A, this locker has a bottom- forward hinging aftpanel and removable shelf to give access to the chain locker, see dwg VK-OR SZENKRENY K6
• wet unit has 37mm space between wall and 5mm lining to accommodate piping see picture 001 and 007
• forepeak bhd has sleeves to support bookshelves see picture 004 and wardrobe top (is ceiling sidedeck)

Remarks Cabin 2

• 37mm space aft of wetunit for water connections?

Remarks Bathroom 1

• copy from layout-A
• see inbox\CD-VK-WC-POL-UNIT.dwg but check those expansions with inbox/00-2D PROJECT X.dwg

Remarks Salon / Galley

• settee as long as possible, foot end of berth cabin 2 under settee, if not possible than sofa as in layout A (part SF-H3-01)
• seat height is 350mm + 17mm seat panel
• galley 'floats' partly above engine room hatches
• galley parts from layout A can be used again
• galley forward cabinet houses the distribution panel (W550xH750xD182) in the side, parallel to CL (see lay out A SH-K2)
• converter in layout A was in locker with distribution panel, now a new location must be found
• 37mm space aft of wetunit to accommodate water connections?
• frame around aft window is 55mm deep, see picture 009. In front of this a panel 11mm white (will be painted)which stops on top of back of settee, 495 above seat.
• settee back has inspection hatch for connections shower

Remarks Bathroom 2 (aft PS)

• modifications made by yard, see mail (mail 20-06-2011)
• locker under sink to be lowered 100mm (mail 20-06-2011)

Remarks Bathroom 3 (aft SB)

• longitudinal length to be reduced by 100mm
• see cabin 3 for position of aft bulkhead
• position for forward bulkhead as layout A

Remarks Cabins aft

• modify:
  • overhead locker enters into ceiling - lower with 6mm (front is OK)
  • frame intersects with ceiling - make cutout in ceiling, see layout-A
  • ceiling stops against overhead locker front, goes at sides beyond it - see layout-A
  • wardrobe shelves are too short, extend with 5
  • standard hatch detail: change overlap from 20 to 15
  • inclinated sole panels - exterior contour to be parallel with CL
  • inclinated sole panels - extend on aft side to allow for 20x20 for supporting wall?
  • aft bhd SB - groove for supporting upper bed
  • bathroom walls - add groove for supporting upper beds (5mm in Abet is not enough)
  • upper berth SB - cut behind lining, not to be support by stringer
  • upper berth SB - add cutout for frame

• missing:
  • side porthole cutouts
  • escape hatch transom panels (PVC) + sides (15mm 2x white)
  • escape hatch cutouts in Vescom panels (size conform Gebo musquito screen)
  • basewood for ceiling

Modifications?

• overhead lockers - hinges on topedge? less forces on hinge
• drawers - plywood drawer box?

Nesting

• Cutter is Ø18
• Nest edge offset - 5mm
• Nest part offset - 22mm but more with corners <90°!, offset contour with 18mm and fillet corners with radius 9 to see cutter path

Systems

• electric - sleevepipes pass through frames (hole Ø26mm), in insulation
• fresh water piping - pass through frames, in insulation

Remarks

• improvements:
  • push button latch distance to edge to be the same for doors, drawers, etc.
  • furniture door bumpers?
  • door overlay is for double overlay, detail for corner cabinet (full overlay?)