Difference between revisions of "11016-01 Koopmans 46 - railing"

From NavykI
Jump to: navigation, search
(Radararch)
(Radararch)
Line 51: Line 51:
 
**consider thick radarcable
 
**consider thick radarcable
 
**tube to extend through footplate
 
**tube to extend through footplate
**wind generator (Sutherland ?!)
+
**wind generator (Sutherland ?!) - as an option. not needed for the moment
 
**solar panels
 
**solar panels
 +
***inspiration model [http://www.sigsolar.hu/?menu=napelemek&mutat=napelem&azon=43 Sun Earth 250WP]
 +
**needs connections to hooks and ropes - eyes on the radar arch
  
 
== Miscellaneous ==
 
== Miscellaneous ==

Revision as of 12:14, 19 March 2012

General

  • workshop drawing for all stainless steel on deck
  • railing with pulpits removable for yacht transport over road (total combination should exceed 4m)

Railing

  • scepters Ø30x2
  • entry scepters as in GA
  • scepters with foot (plate 5mm), bolted trhough GRP into st.st. deckstringer
  • scepters with 6mm bracket at foot
  • consider:
    • provisions for Furlex lines jib + genoa (consult designer?)
    • lifeline

Pulpit fore

  • nav lights
  • lugs for railing wires
  • tube down extends through footplate and deck and st.st. deckstrip for cable passage
  • code zero:
    • chainplate will be about 300mm in front chainplate forestay
    • roller furling with Furlex X

Pulpit aft / radararch

  • principal as CB 38
  • radararch is combined with pulpit
  • arch tubes Ø35x2
  • horizontal middle tube Ø25x2
  • radararch to extend beyond transom for hoisting dinghy outboard engine
  • radararch incorporates biminitop, biminitop connects forward to sprayhood
  • swimladder on SB
  • swimladder with folding part of 2 steps below waterline
  • consider:
    • GRP overlaps only 40mm the st.st. deckstrip (scepter mounting detail?)
    • windsteering
    • MOB buoy - orange life saving floating device is mandatory
    • life raft
    • support for outboardengine of dinghy
    • wind vane steering (including (provisions for) lines to helm)
    • if possible a seat in the corners
    • flagpole st.st. with hook on top, horizontal eye under, flag is fixed with flagloop on top, flagline passes through eye and is fixed around railing tube
    • sternlight
    • hinges of hatches aftseat (to not interfere with stanchions)
    • tackle for lifting outboard engine onto dinghy
    • second anchor? - doesn't think there will be space for it

Radararch

  • emergency antenna VHF - the primary one will be GX2100E; he bought as a secondary one GX2150 Matrix AIS
  • radio antenna (AM/FM) - thinks that the antenna will be a standard one
  • GPS
  • spare antenna for combined radio receiver/AIS (ask Atilla for brand)
  • cables have to pass via frame under deck
    • consider thick radarcable
    • tube to extend through footplate
    • wind generator (Sutherland ?!) - as an option. not needed for the moment
    • solar panels
    • needs connections to hooks and ropes - eyes on the radar arch

Miscellaneous

  • deck brackets for dinghy storage
  • 2 fender supports on aft pulpit? Ø250? (6 in total, 4 stored in anchorlocker?) - fender supports - no space for them
  • windsteering control lines go to disc on Jefa pedestal?
  • mainsheet Ø13mm (important for correct rope clutch)

Windscreen

  • contact at Gebo is Wim Maaneman (export):
    • T 0031 36 5211 233
    • M 0031 610 162 307
    • E wmaaneman@gebo.com
  • control lines have to pass through base
  • top of windscreen to be in 1 plane
  • mounting flange 16 or 37mm length?

Sprayhood

  • transfers from angled windscreen into round shape
  • 2 frames/brackets

Inspiration