Difference between revisions of "CNCwerk"
From NavykI
(→Tools) |
|||
| Line 2: | Line 2: | ||
== Tools == | == Tools == | ||
| − | + | *router bit Ø10 and Ø20 | |
| − | + | *router bit V 45° | |
| − | + | *router bit V 60° (markings) | |
| − | + | *drill Ø3.0 (smallest) | |
| − | + | *drill Ø5.0 | |
== Drafting == | == Drafting == | ||
Revision as of 10:07, 24 August 2015
- CNC werk, owner Jules Bosma
Tools
- router bit Ø10 and Ø20
- router bit V 45°
- router bit V 60° (markings)
- drill Ø3.0 (smallest)
- drill Ø5.0
Drafting
- Layers
- for each tool
- for each router bits per contour (outside / inside / inset)
- Contours
- closed polylines
- no curves
- no splines
- Drilling holes
- layer per diameter per depth
- mark with 'dot' (AutoCAD)
- Narrow strips > milled full depth minus 1mm (so strips in an 18mm sheet will be milled 17mm deep and will remain in the sheet)
Labels
- file format excel
- each info line in a column
- at least showing part ID and sheet ID (so 2 columns)
- if possible show material ID (3 columns)
