Difference between revisions of "CNCwerk"
From NavykI
(→Tools) |
(→Tools) |
||
| Line 2: | Line 2: | ||
== Tools == | == Tools == | ||
| − | *router | + | *router bits |
| − | *router bit V 45° | + | **straight |
| − | * | + | ***Ø10 |
| − | * | + | ***Ø20 |
| − | * | + | *router bit V |
| + | **45° | ||
| + | **60° > markings | ||
| + | *drills | ||
| + | **Ø3.0 > smallest | ||
| + | **Ø5.0 | ||
== Drafting == | == Drafting == | ||
Revision as of 10:08, 24 August 2015
- CNC werk, owner Jules Bosma
Tools
- router bits
- straight
- Ø10
- Ø20
- straight
- router bit V
- 45°
- 60° > markings
- drills
- Ø3.0 > smallest
- Ø5.0
Drafting
- Layers
- for each tool
- for each router bits per contour (outside / inside / inset)
- Contours
- closed polylines
- no curves
- no splines
- Drilling holes
- layer per diameter per depth
- mark with 'dot' (AutoCAD)
- Narrow strips > milled full depth minus 1mm (so strips in an 18mm sheet will be milled 17mm deep and will remain in the sheet)
Labels
- file format excel
- each info line in a column
- at least showing part ID and sheet ID (so 2 columns)
- if possible show material ID (3 columns)
