Difference between revisions of "15038 Bestevaer 45 ST Pure"
From NavykI
(→TO DO) |
(→Remarks milling) |
||
| (45 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY). | 'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY). | ||
| + | |||
| + | ==Scope== | ||
| + | *detailed 3D model | ||
| + | *general detail sheet | ||
| + | *CNC milling files (for all panel parts, drill holes not included) | ||
| + | *assembly drawings (with indication for bevels) | ||
| + | *list of hardware (98 assembly screws 4.5x30) | ||
| + | *list of appliances | ||
| + | *list of mouldings ('lijstenstaat') | ||
| + | *weight brut + net + COG | ||
==Planning== | ==Planning== | ||
| Line 12: | Line 22: | ||
==TO DO== | ==TO DO== | ||
| + | |||
| + | ===Parts=== | ||
| + | *one side veneer > add 'top veneer' or 'bottom veneer' to part label? (for milling operator) | ||
| + | |||
| + | ===Issues and mistakes=== | ||
| + | *panel thickness tolerance > larger than 1mm > resulting in many gaps > Kuiper did not deliver sanded/calibrated panels | ||
| + | *deckhouse | ||
| + | **lining > window cutouts > offset is made outside instead of inside | ||
| + | **lining > aft wall (SU-01-09) > window cutout has moved (SU-01-07 is okay) | ||
| + | |||
===Solid model=== | ===Solid model=== | ||
====General==== | ====General==== | ||
| − | + | *Toilet outlet > route (?) | |
| − | *Toilet outlet > route | ||
====Sole==== | ====Sole==== | ||
| − | + | FINAL | |
| − | |||
====Forecabin==== | ====Forecabin==== | ||
| + | FINAL | ||
| + | |||
====Salon==== | ====Salon==== | ||
| − | + | FINAL | |
| − | |||
====Galley==== | ====Galley==== | ||
| + | FINAL | ||
| + | |||
====Bathroom==== | ====Bathroom==== | ||
| + | FINAL except for wooden rims upper lockers (to be added) | ||
====Aft ship==== | ====Aft ship==== | ||
| − | + | FINAL | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
====Superstructure==== | ====Superstructure==== | ||
| − | + | FINAL | |
| − | |||
| − | |||
| − | |||
| − | |||
====Sole structure==== | ====Sole structure==== | ||
| − | *finalize | + | *finalize (after approval of KMY) |
====Other files==== | ====Other files==== | ||
| Line 55: | Line 66: | ||
**Metal parts (?): | **Metal parts (?): | ||
***handrails | ***handrails | ||
| + | ****galley | ||
| + | ****SB > to model | ||
| + | ****PS > to model | ||
====Overlength==== | ====Overlength==== | ||
| Line 61: | Line 75: | ||
==Navyk remarks for KMY== | ==Navyk remarks for KMY== | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==INFO== | ==INFO== | ||
| Line 165: | Line 141: | ||
===Salon=== | ===Salon=== | ||
| − | |||
===Galley=== | ===Galley=== | ||
| − | * | + | *Drawers |
| + | **PDF info: P:\15038 Bestevaer 45 ST Pure\Inbox\70 Interior\Arcitech drawers | ||
**Hettich Arcitech drawers st.steel > [http://web2.hettich.com/hbh/catalog/Start.do?localeId=en&model=procat] | **Hettich Arcitech drawers st.steel > [http://web2.hettich.com/hbh/catalog/Start.do?localeId=en&model=procat] | ||
*fridge is a [http://www.webasto.com/gb/markets-products/motorhomes/comfort-solutions/refrigeration-solutions/cruise-refrigerators Webasto] | *fridge is a [http://www.webasto.com/gb/markets-products/motorhomes/comfort-solutions/refrigeration-solutions/cruise-refrigerators Webasto] | ||
| Line 195: | Line 171: | ||
===Superstructure=== | ===Superstructure=== | ||
| − | *Skyscreen | + | *Skyscreen |
| + | **type Roller Surface 2 With Seal | ||
| + | **orientation is transverse sliding | ||
==Modeling refereneces== | ==Modeling refereneces== | ||
| Line 215: | Line 193: | ||
==Milling== | ==Milling== | ||
| − | *Subcontracted to [ | + | *Subcontracted to [[CNCwerk]] |
| − | + | ===Remarks milling=== | |
| − | + | *drill holes > not drilled (overlooked, only the crosshairs on no process layer were noticed and removed) | |
| − | + | *panel thickness > varies from 15.3 - 17mm | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | * | ||
==Aluminum== | ==Aluminum== | ||
| Line 248: | Line 210: | ||
*Willem-Jan van der Vegt - engineer (our contactperson) | *Willem-Jan van der Vegt - engineer (our contactperson) | ||
*Haaie Andringa - foreman carpentry | *Haaie Andringa - foreman carpentry | ||
| + | *Oscar - freelance carpenter | ||
== Exchange work == | == Exchange work == | ||
| Line 253: | Line 216: | ||
*integration of heater ducting is not in contract | *integration of heater ducting is not in contract | ||
*info is not delivered on Monday, June 15 but came partially on June 16 and 17 | *info is not delivered on Monday, June 15 but came partially on June 16 and 17 | ||
| + | *4 hours for renesting 12mm in smaller sheet (not confirmed by Willem yet) | ||
== As discussed == | == As discussed == | ||
Latest revision as of 13:54, 30 October 2015
'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY).
Contents
Scope[edit]
- detailed 3D model
- general detail sheet
- CNC milling files (for all panel parts, drill holes not included)
- assembly drawings (with indication for bevels)
- list of hardware (98 assembly screws 4.5x30)
- list of appliances
- list of mouldings ('lijstenstaat')
- weight brut + net + COG
Planning[edit]
- Conform mail Willem Berends of July 16
- WK 30 Navyk to implement all comments and changes.
- WK 30 End of the week Navyk will send the draft files for review.
- WK 32 Bamboo wood will be delivered to KMY for surface preparations.
- WK 33 Until Wednesday Noon, KMY has the time to review and send some additional remarks.
- WK 34 All wood material (exl. floor) will be deliverer at CNC works.
- WK 34 End of this week Navyk will deliver the complete files to KMY.
- WK 35 CNC will cut all materials en deliver to the KMY.
TO DO[edit]
Parts[edit]
- one side veneer > add 'top veneer' or 'bottom veneer' to part label? (for milling operator)
Issues and mistakes[edit]
- panel thickness tolerance > larger than 1mm > resulting in many gaps > Kuiper did not deliver sanded/calibrated panels
- deckhouse
- lining > window cutouts > offset is made outside instead of inside
- lining > aft wall (SU-01-09) > window cutout has moved (SU-01-07 is okay)
Solid model[edit]
General[edit]
- Toilet outlet > route (?)
Sole[edit]
FINAL
Forecabin[edit]
FINAL
Salon[edit]
FINAL
Galley[edit]
FINAL
Bathroom[edit]
FINAL except for wooden rims upper lockers (to be added)
Aft ship[edit]
FINAL
Superstructure[edit]
FINAL
Sole structure[edit]
- finalize (after approval of KMY)
Other files[edit]
- labels > create excel sheet with codes for each part
- additional files:
- Marlan templates
- Metal parts (?):
- handrails
- galley
- SB > to model
- PS > to model
- handrails
Overlength[edit]
- 10mm at bulkheads which connect to superstructure
- 5mm at inside contour of base ceiling hull (where it connects to superstructure lining)
[edit]
INFO[edit]
General[edit]
- driver-drill
- total length including bit > 210mm
- distance shaft center to top of housing > 36mm
hatches and portlights[edit]
- Deckhatches:
- Lewmar Size 60 low profile: 39960030
- Lewmar Size 30 low profile: 39930030
- Portligths in superstructure:
- Lewmar Standard portlight Size 3: 393320200
- Portlights in cockpit:
- Lewmar Standard portlight Size 5: 393520200
hardware[edit]
- finish > stainless steel
lining[edit]
- V-grooves, every 100mm, parallel to deckline/sheer
ceilings[edit]
- leather panels > mounted with Fastmount
entrance doors[edit]
- door width net standard > 560mm
- door width net minimum > 500mm
- gap under door > ?
- core > plywood ocoume 18mm
- cover panels > plywood bamboo 7mm
- hinges?
- mortise lock?
- handles?
- door plates/shields?
- height doorhandles?
- door catch?
- ajar hook?
lockers[edit]
- shelves > mounted with shelf supports (Hettich)
- FYI > solid corner profiles in furniture plintes will be painted white
- hinges > Hettich Intermat Soft....
- drawer runners > Hettich Quadro 30
- closing device > Kroon 372369
- shelf supports
seats[edit]
- seat cushion thickness 100mm
- back vertical
- seat panel 340mm above sole
berths[edit]
- matrass thickness 100mm
- bed slats 40 mm from Spacerflex
Sole[edit]
- base > 18mm ocoume, varnished all around
- finish > chest nut
- margin boards > width 70mm
- hatch locking device > see material list
Fore Cabin[edit]
Salon[edit]
Galley[edit]
- Drawers
- PDF info: P:\15038 Bestevaer 45 ST Pure\Inbox\70 Interior\Arcitech drawers
- Hettich Arcitech drawers st.steel > [1]
- fridge is a Webasto
- CR 85 EL - first choice
- CR 65 EL - second choice
- front to be white
- sink > Belship 0430331515CS
- stove > Force 10 F63356
- gimbal 30°
- faucet > Damixa Willow Kitchen Chrome
Bathroom[edit]
- black water tank > behind toilet, 2 options:
- glass doors > semi standard product
- sink > Belship 043018
- faucet > [ http://www.badkamerwinkel.nl/damixa-willow-wastafelkraan-met-klik-waste-chroom-358210000 Damixa Willow Bathroom faucet chrome]
- showermixer > Damixa Willow Showermixer chrome
- shower head > Damixa hand shower chrome
Aft cabins[edit]
- entrance door > rotates inside
Deck house[edit]
Superstructure[edit]
- Skyscreen
- type Roller Surface 2 With Seal
- orientation is transverse sliding
Modeling refereneces[edit]
Tolerance[edit]
- distance to frame flanges 20
Lining[edit]
- deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)
Base ceiling[edit]
- superstructure
- offset 58 from inside shell
- after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
- interference with stringers <2, to be solved on board
Sheet estimation[edit]
transverse grain[edit]
- 17mm single bamboo - 3 sheets - bench fronts SL / galley front / table sides
- 6mm single bamboo - 1 sheet - bench fronts DH
Milling[edit]
- Subcontracted to CNCwerk
Remarks milling[edit]
- drill holes > not drilled (overlooked, only the crosshairs on no process layer were noticed and removed)
- panel thickness > varies from 15.3 - 17mm
Aluminum[edit]
- mast bulkhead > bolted? requires hatch in bed
- mast bulkhead > cutout entrance door + heater hose
- aft bulkhead > cutout for heater hose
- galley > pillar
- bolt connection > create detail
People[edit]
- Eeuwe Kooi - director/owner (not directly involved)
- Willem Berends - chain manger (responsible for contract)
- Willem-Jan van der Vegt - engineer (our contactperson)
- Haaie Andringa - foreman carpentry
- Oscar - freelance carpenter
Exchange work[edit]
- KMY negotiated €1.000 discount for delivering a 3D model of interior - send file is only a block file
- integration of heater ducting is not in contract
- info is not delivered on Monday, June 15 but came partially on June 16 and 17
- 4 hours for renesting 12mm in smaller sheet (not confirmed by Willem yet)
As discussed[edit]
July 1, 2015[edit]
- furniture doors - 17mm is OK
- entrance hatch recess box - PUR insulated, put plywood panel in front
- stair steps solid wood
- cockpit sole - covered with cork 9mm
- lining - leather panels are canceled
- porthole boxes - yard makes tube, out of our delivery
June 16, 2015[edit]
- black water tank - to be determined by Navyk, volume around 50 liter, position SB behind toilet
June 11,2015[edit]
- tolerances
- vertical:
- sole to supporting structure - 0mm
- ceiling to structure - 0mm
- horizontal
- clearance from inner frame contour - 20mm (space between frames is reserved for systems)
- vertical:
- insulation type is PUR
- grain orientation will be vertical
- sole supports are alu tube 50x30x?
- cabinet interiors to be white
- KMY workshop facilities:
- no veneer press
- edge band machine for straight edges
- lamello machine
- round router bits R6, R8, R10, R12
- Navyk will route the ducting for airheating through the interior
- Navyk is free to use their own material naming
- Navyk will give a price offer for the aluminium sole supports
Structure model - modifications![edit]
- Forepeak bulkhead - stiffeners will be on aft side (cabin side)
- Pilothouse - between the windows will be a vertical T-profile with a web of 50x6 and a flange of 50x8
- Entrance door forecabin - to be determined by Navyk, it will be a joinery door, not an aluminum door
- sole structure - to be determined, Navyk will make a price offer for this
