Difference between revisions of "15038 Bestevaer 45 ST Pure"

Latest revision as of 13:54, 30 October 2015

'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY).

Scope[edit]

• detailed 3D model
• general detail sheet
• CNC milling files (for all panel parts, drill holes not included)
• assembly drawings (with indication for bevels)
• list of hardware (98 assembly screws 4.5x30)
• list of appliances
• list of mouldings ('lijstenstaat')
• weight brut + net + COG

Planning[edit]

• Conform mail Willem Berends of July 16
• WK 30 Navyk to implement all comments and changes.
• WK 30 End of the week Navyk will send the draft files for review.
• WK 32 Bamboo wood will be delivered to KMY for surface preparations.
• WK 33 Until Wednesday Noon, KMY has the time to review and send some additional remarks.
• WK 34 All wood material (exl. floor) will be deliverer at CNC works.
• WK 34 End of this week Navyk will deliver the complete files to KMY.
• WK 35 CNC will cut all materials en deliver to the KMY.

TO DO[edit]

Parts[edit]

• one side veneer > add 'top veneer' or 'bottom veneer' to part label? (for milling operator)

Issues and mistakes[edit]

• panel thickness tolerance > larger than 1mm > resulting in many gaps > Kuiper did not deliver sanded/calibrated panels
• deckhouse
  • lining > window cutouts > offset is made outside instead of inside
  • lining > aft wall (SU-01-09) > window cutout has moved (SU-01-07 is okay)

Solid model[edit]

General[edit]

• Toilet outlet > route (?)

Sole[edit]

FINAL

Forecabin[edit]

FINAL

Salon[edit]

FINAL

Galley[edit]

FINAL

Bathroom[edit]

FINAL except for wooden rims upper lockers (to be added)

Aft ship[edit]

FINAL

Superstructure[edit]

FINAL

Sole structure[edit]

• finalize (after approval of KMY)

Other files[edit]

• labels > create excel sheet with codes for each part
• additional files:
  • Marlan templates
  • Metal parts (?):
    • handrails
      • galley
      • SB > to model
      • PS > to model

Overlength[edit]

• 10mm at bulkheads which connect to superstructure
• 5mm at inside contour of base ceiling hull (where it connects to superstructure lining)

Navyk remarks for KMY[edit]

INFO[edit]

General[edit]

• driver-drill
  • total length including bit > 210mm
  • distance shaft center to top of housing > 36mm

hatches and portlights[edit]

• Deckhatches:
  • Lewmar Size 60 low profile: 39960030
  • Lewmar Size 30 low profile: 39930030
    • Skyscreens
• Portligths in superstructure:
  • Lewmar Standard portlight Size 3: 393320200
• Portlights in cockpit:
  • Lewmar Standard portlight Size 5: 393520200

hardware[edit]

• finish > stainless steel

lining[edit]

• V-grooves, every 100mm, parallel to deckline/sheer

ceilings[edit]

• leather panels > mounted with Fastmount

entrance doors[edit]

• door width net standard > 560mm
• door width net minimum > 500mm
• gap under door > ?
• core > plywood ocoume 18mm
• cover panels > plywood bamboo 7mm
• hinges?
• mortise lock?
• handles?
• door plates/shields?
• height doorhandles?
• door catch?
• ajar hook?

lockers[edit]

• shelves > mounted with shelf supports (Hettich)
• FYI > solid corner profiles in furniture plintes will be painted white
• hinges > Hettich Intermat Soft....
• drawer runners > Hettich Quadro 30
• closing device > Kroon 372369
• shelf supports

seats[edit]

• seat cushion thickness 100mm
• back vertical
• seat panel 340mm above sole

berths[edit]

• matrass thickness 100mm
• bed slats 40 mm from Spacerflex

Sole[edit]

• base > 18mm ocoume, varnished all around
• finish > chest nut
• margin boards > width 70mm
• hatch locking device > see material list

Fore Cabin[edit]

Salon[edit]

Galley[edit]

• Drawers
  • PDF info: P:\15038 Bestevaer 45 ST Pure\Inbox\70 Interior\Arcitech drawers
  • Hettich Arcitech drawers st.steel > [1]
• fridge is a Webasto
  • CR 85 EL - first choice
  • CR 65 EL - second choice
  • front to be white
• sink > Belship 0430331515CS
• stove > Force 10 F63356
  • gimbal 30°
• faucet > Damixa Willow Kitchen Chrome

Bathroom[edit]

• black water tank > behind toilet, 2 options:
  • preferred option (60L)
  • second option
• glass doors > semi standard product
• sink > Belship 043018
• faucet > [ http://www.badkamerwinkel.nl/damixa-willow-wastafelkraan-met-klik-waste-chroom-358210000 Damixa Willow Bathroom faucet chrome]
• showermixer > Damixa Willow Showermixer chrome
• shower head > Damixa hand shower chrome

Aft cabins[edit]

• entrance door > rotates inside

Deck house[edit]

Superstructure[edit]

• Skyscreen
  • type Roller Surface 2 With Seal
  • orientation is transverse sliding

Modeling refereneces[edit]

Tolerance[edit]

• distance to frame flanges 20

Lining[edit]

• deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)

Base ceiling[edit]

• superstructure
  • offset 58 from inside shell
  • after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
  • interference with stringers <2, to be solved on board

Sheet estimation[edit]

transverse grain[edit]

• 17mm single bamboo - 3 sheets - bench fronts SL / galley front / table sides
• 6mm single bamboo - 1 sheet - bench fronts DH

Milling[edit]

• Subcontracted to CNCwerk

Remarks milling[edit]

• drill holes > not drilled (overlooked, only the crosshairs on no process layer were noticed and removed)
• panel thickness > varies from 15.3 - 17mm

Aluminum[edit]

• mast bulkhead > bolted? requires hatch in bed
• mast bulkhead > cutout entrance door + heater hose
• aft bulkhead > cutout for heater hose
• galley > pillar
• bolt connection > create detail

People[edit]

• Eeuwe Kooi - director/owner (not directly involved)
• Willem Berends - chain manger (responsible for contract)
• Willem-Jan van der Vegt - engineer (our contactperson)
• Haaie Andringa - foreman carpentry
• Oscar - freelance carpenter

Exchange work[edit]

• KMY negotiated €1.000 discount for delivering a 3D model of interior - send file is only a block file
• integration of heater ducting is not in contract
• info is not delivered on Monday, June 15 but came partially on June 16 and 17
• 4 hours for renesting 12mm in smaller sheet (not confirmed by Willem yet)

As discussed[edit]

July 1, 2015[edit]

• furniture doors - 17mm is OK
• entrance hatch recess box - PUR insulated, put plywood panel in front
• stair steps solid wood
• cockpit sole - covered with cork 9mm
• lining - leather panels are canceled
• porthole boxes - yard makes tube, out of our delivery

June 16, 2015[edit]

• black water tank - to be determined by Navyk, volume around 50 liter, position SB behind toilet

June 11,2015[edit]

• tolerances
  • vertical:
    • sole to supporting structure - 0mm
    • ceiling to structure - 0mm
  • horizontal
    • clearance from inner frame contour - 20mm (space between frames is reserved for systems)
• insulation type is PUR
• grain orientation will be vertical
• sole supports are alu tube 50x30x?
• cabinet interiors to be white
• KMY workshop facilities:
  • no veneer press
  • edge band machine for straight edges
  • lamello machine
  • round router bits R6, R8, R10, R12
• Navyk will route the ducting for airheating through the interior
• Navyk is free to use their own material naming
• Navyk will give a price offer for the aluminium sole supports

Structure model - modifications![edit]

• Forepeak bulkhead - stiffeners will be on aft side (cabin side)
• Pilothouse - between the windows will be a vertical T-profile with a web of 50x6 and a flange of 50x8
• Entrance door forecabin - to be determined by Navyk, it will be a joinery door, not an aluminum door
• sole structure - to be determined, Navyk will make a price offer for this