Difference between revisions of "15007 Bestevaer 45 ST Jongedame"

Revision as of 15:11, 9 September 2015 (edit) 192.168.11.19 (talk) (Created page with "'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY). ==Scope== *det...")		Latest revision as of 15:24, 17 December 2015 (edit) (undo) 192.168.11.15 (talk) (→‎Superstructure)
(148 intermediate revisions by 5 users not shown)
Line 1:		Line 1:
−	'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY).	+	Jongedame is the second boat from the new 'Pure' line of yachts.
	==Scope==		==Scope==
Line 5:		Line 5:
	*general detail sheet		*general detail sheet
	*CNC milling files (for all panel parts, drill holes not included)		*CNC milling files (for all panel parts, drill holes not included)
−	*assembly drawings (with indication for bevels)	+	*assembly drawings (with indication for bevels & edgeband)
−	*list of hardware (98 assembly screws 4.5x30)	+	*list of hardware & appliances
−	*list of appliances
−	*list of mouldings ('lijstenstaat')
	*weight brut + net + COG		*weight brut + net + COG
	==Planning==		==Planning==
−	*Conform mail Willem Berends of July 16	+	*Delivery W47
−	*WK 30 Navyk to implement all comments and changes.	+	*
−	*WK 30 End of the week Navyk will send the draft files for review.
−	*WK 32 Bamboo wood will be delivered to KMY for surface preparations.
−	*WK 33 Until Wednesday Noon, KMY has the time to review and send some additional remarks.
−	*WK 34 All wood material (exl. floor) will be deliverer at CNC works.
−	*WK 34 End of this week Navyk will deliver the complete files to KMY.
−	*WK 35 CNC will cut all materials en deliver to the KMY.
	==TO DO==		==TO DO==
	===Parts===		===Parts===
−	*one side veneer > add 'top veneer' or 'bottom veneer' to part label? (for milling operator)	+	*
−		+	===Material===
		+	*can we use larger sheet dimensions?
	===Solid model===		===Solid model===
	====General====		====General====
−	*Toilet outlet > route (?)	+	*sliding doors lockers > catchers
		+	*replace solid round corners
	====Sole====		====Sole====
−	FINAL	+	Base sole primary model done
	====Forecabin====		====Forecabin====
−	FINAL	+	*entrance door > access carriages + stoppers (door removal)
		+	*entrance door > shorten top sidee
		+	*shelf locker > finger catch, position carriages
		+	*bulkhead > extend topside, ceiling stops
	====Salon====		====Salon====
−	FINAL
	====Galley====		====Galley====
−	FINAL	+	*drawers (including waste bin) > add closing device
		+	*waste bin > closure for smells
		+	*doors > add closing device
	====Bathroom====		====Bathroom====
−	FINAL except for wooden rims upper lockers (to be added)	+	*bulkhead saloon > extend topside, ceiling stops
		+	*cabinet doors > fingerhole + catch
		+	*cabinet doors > hinges
	====Aft ship====		====Aft ship====
−	FINAL	+	*entrance > double check model with KMY
		+	*air heating > add hose penetrations to panels
	====Superstructure====		====Superstructure====
−	FINAL	+	*lining > move inside with 10mm
		+	*hatches > basepanels 17mm with cork 4mm and edgeband 2mm
		+	*portlights > basepanels with 4mm cork against aluminum shell
		+	*skyscreens > add to salon and fore cabin
		+	*entrance > narrow ceiling cutout conform latest construction model
		+	*finish ceiling > remove the narrow strip at exterior contour and extend ceiling panels
		+	*base ceiling + hatch rings > make planar at CL, width as hatch rings
		+	*base + finish ceiling > everlength 20mm at aft side, at forward end of deckhouse
		+	*deckhouse > lining > shorten top edge, flush with topside of base ceiling, delete cleat
		+	*deckhouse > ceiling > adjust in way of entrance
		+	*deckhouse > lining > mount on basewood, increase window cutouts to 3mm offset from window, add rings (I will ask detail), basewood NOT in our delivery
		+	*baseceiling > mast bulkhead > stop ceiling, continue bulkheads (bathroom + fore cabin)
		+
		+	====Basewood hull====
		+	*portlights > basepanels with 4mm cork
	====Sole structure====		====Sole structure====
−	*finalize (after approval of KMY)
	====Other files====		====Other files====
−	*labels > create excel sheet with codes for each part	+
−	*additional files:
−	**Marlan templates
−	**Metal parts (?):
−	***handrails
−	****galley
−	****SB > to model
−	****PS > to model
	====Overlength====		====Overlength====
−	*10mm at bulkheads which connect to superstructure
−	*5mm at inside contour of base ceiling hull (where it connects to superstructure lining)
	==Navyk remarks for KMY==		==Navyk remarks for KMY==
	====General====		====General====
−	*push button > knob can be rotated 90° or 180°?	+
−	*heating	+	====Sole structure====
−	**outlets > HIP?	+	*table mounting?
−	**accesoires?	+
		+	====Fore cabin ====
		+
		+	====Bathroom====
		+	*upper locker doors > no radius at corners? handles?
		+	*upper locker shelf rims
		+
		+	====Galley====
		+	*watermixer
		+	*safe
		+	*access fridge?
		+
		+	====Salon====
		+
		+	====Aft ship====
		+	*roller blinds > in model?
	==INFO==		==INFO==
Line 81:		Line 101:
	**total length including bit > 210mm		**total length including bit > 210mm
	**distance shaft center to top of housing > 36mm		**distance shaft center to top of housing > 36mm
		+	*NO graphandles
		+	*spec 500 'bars for hatches' > NOT in scope Navyk
	====hatches and portlights====		====hatches and portlights====
	*Deckhatches:		*Deckhatches:
	**Lewmar Size 60 low profile: 39960030		**Lewmar Size 60 low profile: 39960030
−	**Lewmar Size 30 low profile: 39930030
	***[http://www.oceanair.co.uk/marine/products/skyscreen-roller-surface-2#quicktabs-product_tabs=6 Skyscreens]		***[http://www.oceanair.co.uk/marine/products/skyscreen-roller-surface-2#quicktabs-product_tabs=6 Skyscreens]
	*Portligths in superstructure:		*Portligths in superstructure:
Line 91:		Line 112:
	*Portlights in cockpit:		*Portlights in cockpit:
	**Lewmar Standard portlight Size 5: [https://www.lewmar.com/products.asp?id=8757&lid=25083 393520200]		**Lewmar Standard portlight Size 5: [https://www.lewmar.com/products.asp?id=8757&lid=25083 393520200]
		+
	====hardware====		====hardware====
−	*finish > stainless steel	+
		+	====walls====
		+	*panels > 17-HPH-15 RAL 9010
		+	*round corners > solid teak, varnished
	====lining====		====lining====
−	*V-grooves, every 100mm, parallel to deckline/sheer	+	*panels > 12-HPH-10 RAL 9010
		+	*knuckles > permitted, minimum width 300
	====ceilings====		====ceilings====
−	*leather panels > mounted with [http://www.fastmount.com Fastmount]	+	*as Nescio/Pure (15038)
		+	*lighting > EB12/EB/22?flex-05
	====entrance doors====		====entrance doors====
−	*door width net standard > 560mm	+	*panels > RAL 9010
−	*door width net minimum > 500mm	+	*sliding door system > [http://www.henderson.nl/sliding_door_gear_literature.php?lit_lang=en&category=Domestic&config=Straight%20Sliding&range=Room%20Dividers&id=126&product_id= Husky 100 aluminum]
−	*gap under door > ?	+	*hinges > Kroon 353241
−	*core > plywood ocoume 18mm	+	*mortise lock > Kroon 735831
−	*cover panels > plywood bamboo 7mm	+	*handles > bathroom - Foresti & Suardi 480A (Kroon S355945)
−	*hinges?	+	*door lock button > bathroom - Foresti & Suardi 481C (Kroon S352419)
−	*mortise lock?
−	*handles?
−	*door plates/shields?
	*height doorhandles?		*height doorhandles?
−	*door catch?	+	*sliding door catch?
−	*ajar hook?
	====lockers====		====lockers====
−	*shelves > mounted with shelf supports (Hettich)	+	*panels > 12-HPH-10 RAL 9010 and 17-HPH-15 RAL 9010
−	*FYI > solid corner profiles in furniture plintes will be painted white	+	*round corners > plywood, teak veneered
−	*hinges > Hettich Intermat Soft....	+	*solid profiles > teak, varnished
−	*drawer runners > Hettich Quadro 30	+	*galley > lower cabinets > Alu HPL (Alu-poplar-Alu)
−	*closing device > [https://www.kroon.nl/cgi-bin/shop/scripts/shop.cgi?dep=group&grp=13743 Kroon 372369]	+	*galley > counter top > Marlan 12mm, color tbd
−	*shelf supports	+	*shelves > mounted with shelf supports Kroon 342354 (Hettich 0053012)
		+	*sliding door system > [http://www.henderson.nl/sliding_door_gear_literature.php?lit_lang=en&category=Domestic&config=Straight%20Sliding&range=Room%20Dividers&id=123&product_id= Husky 50]
		+	*hinges > Hettich Intermat Soft 9943 > Kroon 356850 (Hettich 1031071)
		+	*closing device > Kroon 374965
		+	*drawers > HPL white
		+	*securing ledge > aluminum panel 5mm,  make grooves fitting 5mm Al dividers
		+	*door and drawer grips > finish > edge band
		+	*ventilation sleeves > finish > paint
	====seats====		====seats====
−	*seat cushion thickness 100mm	+	*seat cushion thickness 100
−	*back vertical	+	*back cushion thickness 80 (deck house)
−	*seat panel 340mm above sole
	====berths====		====berths====
−	*matrass thickness 100mm	+	*mattress > thickness 120mm
−	*bed slats 40 mm from [http://www.enpremiere.com/trucks/specifications.php?lng=gb&PHPSESSID=0a80df387b7f822bd5aaa7fb37d18ca6 Spacerflex]	+	*ventilation > holes in bed panel
	===Sole===		===Sole===
	*base > 18mm ocoume, varnished all around		*base > 18mm ocoume, varnished all around
−	*finish > chest nut	+	*finish > teak and holly 60mm > possible Bruynzeel Decora Sole Flooring '''T.B.D.'''
−	*margin boards > width 70mm	+	*margin boards > no margin boards
−	*hatch locking device > see material list	+	*hatch locking device > Southco E5-70-1627-701 + Southco E3-13-4
		+	*sole supports > alu tubing 50x30
	===Fore Cabin===		===Fore Cabin===
		+	*bed storage > access from top & side
	===Salon===		===Salon===
		+	*folding table
		+	**veneered top
		+	**aluminium pillars diameter 120-180
		+	**10mm teak margin around table top
		+	**hardware
		+	*NO e-panel
		+	*Safe > in SB bench under sole > integrated > yard made of aluminium 5mm (sketch will follow)
	===Galley===		===Galley===
−	*Drawers	+
−	**PDF info: P:\15038 Bestevaer 45 ST Pure\Inbox\70 Interior\Arcitech drawers	+	*Fridge > [http://www.indelwebastomarine.com/int/products/fridges-freezers/built-in-boxes/built-in-box-bi-75/ Frigomatic BI75] ''WATERCOOLED''
−	**Hettich Arcitech drawers st.steel > [http://web2.hettich.com/hbh/catalog/Start.do?localeId=en&model=procat]	+	*Freezer > [http://www.indelwebastomarine.com/int/products/fridges-freezers/built-in-boxes/ Frigomatic BI53] > is it possible to place it under one of the three beds? ''AIRCOOLED''
−	*fridge is a [http://www.webasto.com/gb/markets-products/motorhomes/comfort-solutions/refrigeration-solutions/cruise-refrigerators Webasto]	+	*Sink > [http://www.exalto.com/nl-nl/dubbele-wasbak-rechthoekig-rvs-600x320mm-70.01.45 Exalto 70.01.45]
−	**CR 85 EL - first choice	+	*Stove > Force 10 type (TECHNAUTIC 596122) [http://www.dekkerwatersport.nl/pdf/rocaset.pdf Force 10 TECHNAUTIC 596122]
−	**CR 65 EL - second choice	+	*Foot pump > [http://www.jachtbouwloedeman.nl/watersportwinkel/water-tanksystemen/drinkwater-systemen/whale-gusher-galley-mk3-whale-gusher-galley-mk3-032610/032610/2450/ Belship 032610]
−	**front to be white	+	*Faucet >
−	*sink > [http://www.belship.eu/catalogus/#82 Belship 0430331515CS]	+	**fresh water T.B.D.
−	*stove > [http://www.force10.com/gas_gimballed_3burner.html Force 10 F63356]	+	**salt water T.B.D.
−	**gimbal 30°
−	*faucet > [http://www.badkamerwinkel.nl/damixa-willow-keukenkraan-chroom-350000000#product-details Damixa Willow Kitchen Chrome]
	===Bathroom===		===Bathroom===
−	*black water tank > behind toilet, 2 options:	+	*no sink
−	**[http://www.nuovarade.com/product.php?productId=181&categoryId=30 preferred option (60L)]	+	*shower mixer > T.B.D.
−	**[http://www.allpa.nl/nl/483171.html second option]	+	*shower head > T.B.D., can be integrated in ceiling if needed (for head room)
−	*glass doors > semi standard product	+	*drain > directly in floor
−	*sink > [http://www.belship.eu/catalogus/#84 Belship 043018]	+	*mirror > at entrance door
−	*faucet > [ http://www.badkamerwinkel.nl/damixa-willow-wastafelkraan-met-klik-waste-chroom-358210000 Damixa Willow Bathroom faucet chrome]	+	*black water tank > [http://www.vetus.com/all-purpose-tank-61l.html Vetus ATANK 061] > position tbd by Navyk
−	*showermixer > [http://www.badkamerwinkel.nl/damixa-willow-douchekraan-15-cm-chroom-352000000 Damixa Willow Showermixer chrome]
−	*shower head > [http://www.badkamerwinkel.nl/damixa-tube-handdouche-chroom-766640000 Damixa hand shower chrome]
	===Aft cabins===		===Aft cabins===
−	*entrance door > rotates inside	+	*entrance door > sliding door system Hasky 100
		+	*boiler under bed > [http://www.indelwebastomarine.com/int/products/isotemp-water-heaters/basic/ Webasto Basic 50] > '''CANCELED (will be outside interior)'''
	===Deck house===		===Deck house===
		+	*aft area of deck house as Nescio/Pure (pillar boxes)
		+	*chart tables > folding footrests by KMY
		+	*chart tables > border of alu
	===Superstructure===		===Superstructure===
Line 173:		Line 211:
	**type Roller Surface 2 With Seal		**type Roller Surface 2 With Seal
	**orientation is transverse sliding		**orientation is transverse sliding
		+
		+	===Systems===
		+	====HVAC====
		+	*KMY will provide drawing
		+
		+	====Fire fighting====
		+	*KMY will provide model and quantity
		+
		+	====Electrical system====
		+	*Battery > MASTERVOLT MLI Ultra 12/5000 art. nr. 66015000
		+	*Sockets > Jung stainless steel mat ES 1520 NKI
		+
		+	====Safety====
		+	*EPIRB MT403
		+	**location in recess next to deckhouse entrance
	==Modeling refereneces==		==Modeling refereneces==
Line 187:		Line 240:
	==Sheet estimation==		==Sheet estimation==
−	===transverse grain===
−	*17mm single bamboo - 3 sheets - bench fronts SL / galley front / table sides
−	*6mm single bamboo - 1 sheet - bench fronts DH
−
	==Milling==		==Milling==
	*Subcontracted to [[CNCwerk]]		*Subcontracted to [[CNCwerk]]
	==Aluminum==		==Aluminum==
−	*mast bulkhead > bolted? requires hatch in bed
	*mast bulkhead > cutout entrance door + heater hose		*mast bulkhead > cutout entrance door + heater hose
	*aft bulkhead > cutout for heater hose		*aft bulkhead > cutout for heater hose
−	*galley > pillar
	*bolt connection > create detail		*bolt connection > create detail
Line 208:		Line 255:
	== Exchange work ==		== Exchange work ==
−	*KMY negotiated €1.000 discount for delivering a 3D model of interior - send file is only a block file
−	*integration of heater ducting is not in contract
−	*info is not delivered on Monday, June 15 but came partially on June 16 and 17
	== As discussed ==		== As discussed ==
−	=== July 1, 2015 ===
−	*furniture doors - 17mm is OK
−	*entrance hatch recess box - PUR insulated, put plywood panel in front
−	*stair steps solid wood
−	*cockpit sole - covered with cork 9mm
−	*lining - leather panels are canceled
−	*porthole boxes - yard makes tube, out of our delivery
−
−	=== June 16, 2015 ===
−	*black water tank - to be determined by Navyk, volume around 50 liter, position SB behind toilet
−	=== June 11,2015 ===
−	*tolerances
−	**vertical:
−	***sole to supporting structure - 0mm
−	***ceiling to structure - 0mm
−	**horizontal
−	***clearance from inner frame contour - 20mm (space between frames is reserved for systems)
−	*insulation type is PUR
−	*grain orientation will be vertical
−	*sole supports are alu tube 50x30x?
−	*cabinet interiors to be white
−	*KMY workshop facilities:
−	**no veneer press
−	**edge band machine for straight edges
−	**lamello machine
−	**round router bits R6, R8, R10, R12
−	*Navyk will route the ducting for airheating through the interior
−	*Navyk is free to use their own material naming
−	*Navyk will give a price offer for the aluminium sole supports
	== Structure model - modifications! ==		== Structure model - modifications! ==
−	*Forepeak bulkhead - stiffeners will be on aft side (cabin side)
−	*Pilothouse - between the windows will be a vertical T-profile with a web of 50x6 and a flange of 50x8
−	*Entrance door forecabin - to be determined by Navyk, it will be a joinery door, not an aluminum door
−	*sole structure - to be determined, Navyk will make a price offer for this
−
−
	[[Category: Projects]]		[[Category: Projects]]

---

Latest revision as of 15:24, 17 December 2015

Jongedame is the second boat from the new 'Pure' line of yachts.

Scope[edit]

• detailed 3D model
• general detail sheet
• CNC milling files (for all panel parts, drill holes not included)
• assembly drawings (with indication for bevels & edgeband)
• list of hardware & appliances
• weight brut + net + COG

Planning[edit]

• Delivery W47

TO DO[edit]

Parts[edit]

Material[edit]

• can we use larger sheet dimensions?

Solid model[edit]

General[edit]

• sliding doors lockers > catchers
• replace solid round corners

Sole[edit]

Base sole primary model done

Forecabin[edit]

• entrance door > access carriages + stoppers (door removal)
• entrance door > shorten top sidee
• shelf locker > finger catch, position carriages
• bulkhead > extend topside, ceiling stops

Salon[edit]

Galley[edit]

• drawers (including waste bin) > add closing device
• waste bin > closure for smells
• doors > add closing device

Bathroom[edit]

• bulkhead saloon > extend topside, ceiling stops
• cabinet doors > fingerhole + catch
• cabinet doors > hinges

Aft ship[edit]

• entrance > double check model with KMY
• air heating > add hose penetrations to panels

Superstructure[edit]

• lining > move inside with 10mm
• hatches > basepanels 17mm with cork 4mm and edgeband 2mm
• portlights > basepanels with 4mm cork against aluminum shell
• skyscreens > add to salon and fore cabin
• entrance > narrow ceiling cutout conform latest construction model
• finish ceiling > remove the narrow strip at exterior contour and extend ceiling panels
• base ceiling + hatch rings > make planar at CL, width as hatch rings
• base + finish ceiling > everlength 20mm at aft side, at forward end of deckhouse
• deckhouse > lining > shorten top edge, flush with topside of base ceiling, delete cleat
• deckhouse > ceiling > adjust in way of entrance
• deckhouse > lining > mount on basewood, increase window cutouts to 3mm offset from window, add rings (I will ask detail), basewood NOT in our delivery
• baseceiling > mast bulkhead > stop ceiling, continue bulkheads (bathroom + fore cabin)

Basewood hull[edit]

• portlights > basepanels with 4mm cork

Sole structure[edit]

Other files[edit]

Overlength[edit]

Navyk remarks for KMY[edit]

General[edit]

Sole structure[edit]

• table mounting?

Fore cabin[edit]

Bathroom[edit]

• upper locker doors > no radius at corners? handles?
• upper locker shelf rims

Galley[edit]

• watermixer
• safe
• access fridge?

Salon[edit]

Aft ship[edit]

• roller blinds > in model?

INFO[edit]

General[edit]

• driver-drill
  • total length including bit > 210mm
  • distance shaft center to top of housing > 36mm
• NO graphandles
• spec 500 'bars for hatches' > NOT in scope Navyk

hatches and portlights[edit]

• Deckhatches:
  • Lewmar Size 60 low profile: 39960030
    • Skyscreens
• Portligths in superstructure:
  • Lewmar Standard portlight Size 3: 393320200
• Portlights in cockpit:
  • Lewmar Standard portlight Size 5: 393520200

hardware[edit]

walls[edit]

• panels > 17-HPH-15 RAL 9010
• round corners > solid teak, varnished

lining[edit]

• panels > 12-HPH-10 RAL 9010
• knuckles > permitted, minimum width 300

ceilings[edit]

• as Nescio/Pure (15038)
• lighting > EB12/EB/22?flex-05

entrance doors[edit]

• panels > RAL 9010
• sliding door system > Husky 100 aluminum
• hinges > Kroon 353241
• mortise lock > Kroon 735831
• handles > bathroom - Foresti & Suardi 480A (Kroon S355945)
• door lock button > bathroom - Foresti & Suardi 481C (Kroon S352419)
• height doorhandles?
• sliding door catch?

lockers[edit]

• panels > 12-HPH-10 RAL 9010 and 17-HPH-15 RAL 9010
• round corners > plywood, teak veneered
• solid profiles > teak, varnished
• galley > lower cabinets > Alu HPL (Alu-poplar-Alu)
• galley > counter top > Marlan 12mm, color tbd
• shelves > mounted with shelf supports Kroon 342354 (Hettich 0053012)
• sliding door system > Husky 50
• hinges > Hettich Intermat Soft 9943 > Kroon 356850 (Hettich 1031071)
• closing device > Kroon 374965
• drawers > HPL white
• securing ledge > aluminum panel 5mm, make grooves fitting 5mm Al dividers
• door and drawer grips > finish > edge band
• ventilation sleeves > finish > paint

seats[edit]

• seat cushion thickness 100
• back cushion thickness 80 (deck house)

berths[edit]

• mattress > thickness 120mm
• ventilation > holes in bed panel

Sole[edit]

• base > 18mm ocoume, varnished all around
• finish > teak and holly 60mm > possible Bruynzeel Decora Sole Flooring T.B.D.
• margin boards > no margin boards
• hatch locking device > Southco E5-70-1627-701 + Southco E3-13-4
• sole supports > alu tubing 50x30

Fore Cabin[edit]

• bed storage > access from top & side

Salon[edit]

• folding table
  • veneered top
  • aluminium pillars diameter 120-180
  • 10mm teak margin around table top
  • hardware
• NO e-panel
• Safe > in SB bench under sole > integrated > yard made of aluminium 5mm (sketch will follow)

Galley[edit]

• Fridge > Frigomatic BI75 WATERCOOLED
• Freezer > Frigomatic BI53 > is it possible to place it under one of the three beds? AIRCOOLED
• Sink > Exalto 70.01.45
• Stove > Force 10 type (TECHNAUTIC 596122) Force 10 TECHNAUTIC 596122
• Foot pump > Belship 032610
• Faucet >
  • fresh water T.B.D.
  • salt water T.B.D.

Bathroom[edit]

• no sink
• shower mixer > T.B.D.
• shower head > T.B.D., can be integrated in ceiling if needed (for head room)
• drain > directly in floor
• mirror > at entrance door
• black water tank > Vetus ATANK 061 > position tbd by Navyk

Aft cabins[edit]

• entrance door > sliding door system Hasky 100
• boiler under bed > Webasto Basic 50 > CANCELED (will be outside interior)

Deck house[edit]

• aft area of deck house as Nescio/Pure (pillar boxes)
• chart tables > folding footrests by KMY
• chart tables > border of alu

Superstructure[edit]

• Skyscreen
  • type Roller Surface 2 With Seal
  • orientation is transverse sliding

Systems[edit]

HVAC[edit]

• KMY will provide drawing

Fire fighting[edit]

• KMY will provide model and quantity

Electrical system[edit]

• Battery > MASTERVOLT MLI Ultra 12/5000 art. nr. 66015000
• Sockets > Jung stainless steel mat ES 1520 NKI

Safety[edit]

• EPIRB MT403
  • location in recess next to deckhouse entrance

Modeling refereneces[edit]

Tolerance[edit]

• distance to frame flanges 20

Lining[edit]

• deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)

Base ceiling[edit]

• superstructure
  • offset 58 from inside shell
  • after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
  • interference with stringers <2, to be solved on board

Sheet estimation[edit]

Milling[edit]

• Subcontracted to CNCwerk

Aluminum[edit]

• mast bulkhead > cutout entrance door + heater hose
• aft bulkhead > cutout for heater hose
• bolt connection > create detail

People[edit]

• Eeuwe Kooi - director/owner (not directly involved)
• Willem Berends - chain manger (responsible for contract)
• Willem-Jan van der Vegt - engineer (our contactperson)
• Haaie Andringa - foreman carpentry

Exchange work[edit]

As discussed[edit]

Structure model - modifications![edit]