Difference between revisions of "15007 Bestevaer 45 ST Jongedame"
From NavykI
(→Galley) |
(→Superstructure) |
||
| (118 intermediate revisions by 5 users not shown) | |||
| Line 1: | Line 1: | ||
| − | 'Pure' | + | Jongedame is the second boat from the new 'Pure' line of yachts. |
==Scope== | ==Scope== | ||
| Line 17: | Line 17: | ||
===Parts=== | ===Parts=== | ||
* | * | ||
| − | + | ===Material=== | |
| + | *can we use larger sheet dimensions? | ||
===Solid model=== | ===Solid model=== | ||
====General==== | ====General==== | ||
| + | *sliding doors lockers > catchers | ||
| + | *replace solid round corners | ||
====Sole==== | ====Sole==== | ||
| Line 25: | Line 28: | ||
====Forecabin==== | ====Forecabin==== | ||
| + | *entrance door > access carriages + stoppers (door removal) | ||
| + | *entrance door > shorten top sidee | ||
| + | *shelf locker > finger catch, position carriages | ||
| + | *bulkhead > extend topside, ceiling stops | ||
====Salon==== | ====Salon==== | ||
| − | |||
====Galley==== | ====Galley==== | ||
| − | + | *drawers (including waste bin) > add closing device | |
| + | *waste bin > closure for smells | ||
| + | *doors > add closing device | ||
====Bathroom==== | ====Bathroom==== | ||
| − | + | *bulkhead saloon > extend topside, ceiling stops | |
| + | *cabinet doors > fingerhole + catch | ||
| + | *cabinet doors > hinges | ||
====Aft ship==== | ====Aft ship==== | ||
| − | + | *entrance > double check model with KMY | |
| + | *air heating > add hose penetrations to panels | ||
====Superstructure==== | ====Superstructure==== | ||
| + | *lining > move inside with 10mm | ||
| + | *hatches > basepanels 17mm with cork 4mm and edgeband 2mm | ||
| + | *portlights > basepanels with 4mm cork against aluminum shell | ||
| + | *skyscreens > add to salon and fore cabin | ||
| + | *entrance > narrow ceiling cutout conform latest construction model | ||
| + | *finish ceiling > remove the narrow strip at exterior contour and extend ceiling panels | ||
| + | *base ceiling + hatch rings > make planar at CL, width as hatch rings | ||
| + | *base + finish ceiling > everlength 20mm at aft side, at forward end of deckhouse | ||
| + | *deckhouse > lining > shorten top edge, flush with topside of base ceiling, delete cleat | ||
| + | *deckhouse > ceiling > adjust in way of entrance | ||
| + | *deckhouse > lining > mount on basewood, increase window cutouts to 3mm offset from window, add rings (I will ask detail), basewood NOT in our delivery | ||
| + | *baseceiling > mast bulkhead > stop ceiling, continue bulkheads (bathroom + fore cabin) | ||
| + | ====Basewood hull==== | ||
| + | *portlights > basepanels with 4mm cork | ||
====Sole structure==== | ====Sole structure==== | ||
| Line 50: | Line 75: | ||
==Navyk remarks for KMY== | ==Navyk remarks for KMY== | ||
====General==== | ====General==== | ||
| − | * | + | |
| − | * | + | ====Sole structure==== |
| − | ** | + | *table mounting? |
| + | |||
| + | ====Fore cabin ==== | ||
| + | |||
| + | ====Bathroom==== | ||
| + | *upper locker doors > no radius at corners? handles? | ||
| + | *upper locker shelf rims | ||
| + | |||
| + | ====Galley==== | ||
| + | *watermixer | ||
| + | *safe | ||
| + | *access fridge? | ||
| + | |||
| + | ====Salon==== | ||
| + | |||
| + | ====Aft ship==== | ||
| + | *roller blinds > in model? | ||
==INFO== | ==INFO== | ||
| Line 60: | Line 101: | ||
**total length including bit > 210mm | **total length including bit > 210mm | ||
**distance shaft center to top of housing > 36mm | **distance shaft center to top of housing > 36mm | ||
| + | *NO graphandles | ||
| + | *spec 500 'bars for hatches' > NOT in scope Navyk | ||
====hatches and portlights==== | ====hatches and portlights==== | ||
| Line 71: | Line 114: | ||
====hardware==== | ====hardware==== | ||
| − | * | + | |
| + | ====walls==== | ||
| + | *panels > 17-HPH-15 RAL 9010 | ||
| + | *round corners > solid teak, varnished | ||
====lining==== | ====lining==== | ||
| − | * | + | *panels > 12-HPH-10 RAL 9010 |
| + | *knuckles > permitted, minimum width 300 | ||
====ceilings==== | ====ceilings==== | ||
| − | * | + | *as Nescio/Pure (15038) |
| + | *lighting > EB12/EB/22?flex-05 | ||
====entrance doors==== | ====entrance doors==== | ||
| − | * | + | *panels > RAL 9010 |
| − | *door | + | *sliding door system > [http://www.henderson.nl/sliding_door_gear_literature.php?lit_lang=en&category=Domestic&config=Straight%20Sliding&range=Room%20Dividers&id=126&product_id= Husky 100 aluminum] |
| − | |||
| − | |||
| − | |||
*hinges > Kroon 353241 | *hinges > Kroon 353241 | ||
*mortise lock > Kroon 735831 | *mortise lock > Kroon 735831 | ||
| Line 90: | Line 135: | ||
*door lock button > bathroom - Foresti & Suardi 481C (Kroon S352419) | *door lock button > bathroom - Foresti & Suardi 481C (Kroon S352419) | ||
*height doorhandles? | *height doorhandles? | ||
| − | |||
| − | |||
*sliding door catch? | *sliding door catch? | ||
====lockers==== | ====lockers==== | ||
| + | *panels > 12-HPH-10 RAL 9010 and 17-HPH-15 RAL 9010 | ||
| + | *round corners > plywood, teak veneered | ||
| + | *solid profiles > teak, varnished | ||
| + | *galley > lower cabinets > Alu HPL (Alu-poplar-Alu) | ||
| + | *galley > counter top > Marlan 12mm, color tbd | ||
*shelves > mounted with shelf supports Kroon 342354 (Hettich 0053012) | *shelves > mounted with shelf supports Kroon 342354 (Hettich 0053012) | ||
| − | *sliding door system > | + | *sliding door system > [http://www.henderson.nl/sliding_door_gear_literature.php?lit_lang=en&category=Domestic&config=Straight%20Sliding&range=Room%20Dividers&id=123&product_id= Husky 50] |
*hinges > Hettich Intermat Soft 9943 > Kroon 356850 (Hettich 1031071) | *hinges > Hettich Intermat Soft 9943 > Kroon 356850 (Hettich 1031071) | ||
*closing device > Kroon 374965 | *closing device > Kroon 374965 | ||
| + | *drawers > HPL white | ||
| + | *securing ledge > aluminum panel 5mm, make grooves fitting 5mm Al dividers | ||
| + | *door and drawer grips > finish > edge band | ||
| + | *ventilation sleeves > finish > paint | ||
====seats==== | ====seats==== | ||
| − | *seat cushion thickness | + | *seat cushion thickness 100 |
| − | *back | + | *back cushion thickness 80 (deck house) |
====berths==== | ====berths==== | ||
| − | * | + | *mattress > thickness 120mm |
| − | *holes in bed panel | + | *ventilation > holes in bed panel |
===Sole=== | ===Sole=== | ||
*base > 18mm ocoume, varnished all around | *base > 18mm ocoume, varnished all around | ||
| − | *finish > | + | *finish > teak and holly 60mm > possible Bruynzeel Decora Sole Flooring '''T.B.D.''' |
*margin boards > no margin boards | *margin boards > no margin boards | ||
*hatch locking device > Southco E5-70-1627-701 + Southco E3-13-4 | *hatch locking device > Southco E5-70-1627-701 + Southco E3-13-4 | ||
| + | *sole supports > alu tubing 50x30 | ||
===Fore Cabin=== | ===Fore Cabin=== | ||
| − | *storage access from top & side | + | *bed storage > access from top & side |
===Salon=== | ===Salon=== | ||
| + | *folding table | ||
| + | **veneered top | ||
| + | **aluminium pillars diameter 120-180 | ||
| + | **10mm teak margin around table top | ||
| + | **hardware | ||
| + | *NO e-panel | ||
| + | *Safe > in SB bench under sole > integrated > yard made of aluminium 5mm (sketch will follow) | ||
===Galley=== | ===Galley=== | ||
| − | * | + | |
| − | + | *Fridge > [http://www.indelwebastomarine.com/int/products/fridges-freezers/built-in-boxes/built-in-box-bi-75/ Frigomatic BI75] ''WATERCOOLED'' | |
| − | * | + | *Freezer > [http://www.indelwebastomarine.com/int/products/fridges-freezers/built-in-boxes/ Frigomatic BI53] > is it possible to place it under one of the three beds? ''AIRCOOLED'' |
| − | * | + | *Sink > [http://www.exalto.com/nl-nl/dubbele-wasbak-rechthoekig-rvs-600x320mm-70.01.45 Exalto 70.01.45] |
| − | * | + | *Stove > Force 10 type (TECHNAUTIC 596122) [http://www.dekkerwatersport.nl/pdf/rocaset.pdf Force 10 TECHNAUTIC 596122] |
| − | * | + | *Foot pump > [http://www.jachtbouwloedeman.nl/watersportwinkel/water-tanksystemen/drinkwater-systemen/whale-gusher-galley-mk3-whale-gusher-galley-mk3-032610/032610/2450/ Belship 032610] |
| − | * | + | *Faucet > |
**fresh water T.B.D. | **fresh water T.B.D. | ||
**salt water T.B.D. | **salt water T.B.D. | ||
| − | |||
===Bathroom=== | ===Bathroom=== | ||
| − | * | + | *no sink |
| − | * | + | *shower mixer > T.B.D. |
| − | * | + | *shower head > T.B.D., can be integrated in ceiling if needed (for head room) |
| − | * | + | *drain > directly in floor |
| − | * | + | *mirror > at entrance door |
| − | * | + | *black water tank > [http://www.vetus.com/all-purpose-tank-61l.html Vetus ATANK 061] > position tbd by Navyk |
| − | |||
| − | |||
===Aft cabins=== | ===Aft cabins=== | ||
| − | *entrance door > | + | *entrance door > sliding door system Hasky 100 |
| + | *boiler under bed > [http://www.indelwebastomarine.com/int/products/isotemp-water-heaters/basic/ Webasto Basic 50] > '''CANCELED (will be outside interior)''' | ||
===Deck house=== | ===Deck house=== | ||
| + | *aft area of deck house as Nescio/Pure (pillar boxes) | ||
| + | *chart tables > folding footrests by KMY | ||
| + | *chart tables > border of alu | ||
===Superstructure=== | ===Superstructure=== | ||
| Line 150: | Line 211: | ||
**type Roller Surface 2 With Seal | **type Roller Surface 2 With Seal | ||
**orientation is transverse sliding | **orientation is transverse sliding | ||
| + | |||
| + | ===Systems=== | ||
| + | ====HVAC==== | ||
| + | *KMY will provide drawing | ||
| + | |||
| + | ====Fire fighting==== | ||
| + | *KMY will provide model and quantity | ||
| + | |||
| + | ====Electrical system==== | ||
| + | *Battery > MASTERVOLT MLI Ultra 12/5000 art. nr. 66015000 | ||
| + | *Sockets > Jung stainless steel mat ES 1520 NKI | ||
| + | |||
| + | ====Safety==== | ||
| + | *EPIRB MT403 | ||
| + | **location in recess next to deckhouse entrance | ||
==Modeling refereneces== | ==Modeling refereneces== | ||
Latest revision as of 15:24, 17 December 2015
Jongedame is the second boat from the new 'Pure' line of yachts.
Contents
- 1 Scope
- 2 Planning
- 3 TO DO
- 4 Navyk remarks for KMY
- 5 INFO
- 6 Modeling refereneces
- 7 Sheet estimation
- 8 Milling
- 9 Aluminum
- 10 People
- 11 Exchange work
- 12 As discussed
- 13 Structure model - modifications!
Scope[edit]
- detailed 3D model
- general detail sheet
- CNC milling files (for all panel parts, drill holes not included)
- assembly drawings (with indication for bevels & edgeband)
- list of hardware & appliances
- weight brut + net + COG
Planning[edit]
- Delivery W47
TO DO[edit]
Parts[edit]
Material[edit]
- can we use larger sheet dimensions?
Solid model[edit]
General[edit]
- sliding doors lockers > catchers
- replace solid round corners
Sole[edit]
Base sole primary model done
Forecabin[edit]
- entrance door > access carriages + stoppers (door removal)
- entrance door > shorten top sidee
- shelf locker > finger catch, position carriages
- bulkhead > extend topside, ceiling stops
Salon[edit]
Galley[edit]
- drawers (including waste bin) > add closing device
- waste bin > closure for smells
- doors > add closing device
Bathroom[edit]
- bulkhead saloon > extend topside, ceiling stops
- cabinet doors > fingerhole + catch
- cabinet doors > hinges
Aft ship[edit]
- entrance > double check model with KMY
- air heating > add hose penetrations to panels
Superstructure[edit]
- lining > move inside with 10mm
- hatches > basepanels 17mm with cork 4mm and edgeband 2mm
- portlights > basepanels with 4mm cork against aluminum shell
- skyscreens > add to salon and fore cabin
- entrance > narrow ceiling cutout conform latest construction model
- finish ceiling > remove the narrow strip at exterior contour and extend ceiling panels
- base ceiling + hatch rings > make planar at CL, width as hatch rings
- base + finish ceiling > everlength 20mm at aft side, at forward end of deckhouse
- deckhouse > lining > shorten top edge, flush with topside of base ceiling, delete cleat
- deckhouse > ceiling > adjust in way of entrance
- deckhouse > lining > mount on basewood, increase window cutouts to 3mm offset from window, add rings (I will ask detail), basewood NOT in our delivery
- baseceiling > mast bulkhead > stop ceiling, continue bulkheads (bathroom + fore cabin)
Basewood hull[edit]
- portlights > basepanels with 4mm cork
Sole structure[edit]
Other files[edit]
Overlength[edit]
[edit]
General[edit]
Sole structure[edit]
- table mounting?
Fore cabin[edit]
Bathroom[edit]
- upper locker doors > no radius at corners? handles?
- upper locker shelf rims
Galley[edit]
- watermixer
- safe
- access fridge?
Salon[edit]
Aft ship[edit]
- roller blinds > in model?
INFO[edit]
General[edit]
- driver-drill
- total length including bit > 210mm
- distance shaft center to top of housing > 36mm
- NO graphandles
- spec 500 'bars for hatches' > NOT in scope Navyk
hatches and portlights[edit]
- Deckhatches:
- Lewmar Size 60 low profile: 39960030
- Portligths in superstructure:
- Lewmar Standard portlight Size 3: 393320200
- Portlights in cockpit:
- Lewmar Standard portlight Size 5: 393520200
hardware[edit]
walls[edit]
- panels > 17-HPH-15 RAL 9010
- round corners > solid teak, varnished
lining[edit]
- panels > 12-HPH-10 RAL 9010
- knuckles > permitted, minimum width 300
ceilings[edit]
- as Nescio/Pure (15038)
- lighting > EB12/EB/22?flex-05
entrance doors[edit]
- panels > RAL 9010
- sliding door system > Husky 100 aluminum
- hinges > Kroon 353241
- mortise lock > Kroon 735831
- handles > bathroom - Foresti & Suardi 480A (Kroon S355945)
- door lock button > bathroom - Foresti & Suardi 481C (Kroon S352419)
- height doorhandles?
- sliding door catch?
lockers[edit]
- panels > 12-HPH-10 RAL 9010 and 17-HPH-15 RAL 9010
- round corners > plywood, teak veneered
- solid profiles > teak, varnished
- galley > lower cabinets > Alu HPL (Alu-poplar-Alu)
- galley > counter top > Marlan 12mm, color tbd
- shelves > mounted with shelf supports Kroon 342354 (Hettich 0053012)
- sliding door system > Husky 50
- hinges > Hettich Intermat Soft 9943 > Kroon 356850 (Hettich 1031071)
- closing device > Kroon 374965
- drawers > HPL white
- securing ledge > aluminum panel 5mm, make grooves fitting 5mm Al dividers
- door and drawer grips > finish > edge band
- ventilation sleeves > finish > paint
seats[edit]
- seat cushion thickness 100
- back cushion thickness 80 (deck house)
berths[edit]
- mattress > thickness 120mm
- ventilation > holes in bed panel
Sole[edit]
- base > 18mm ocoume, varnished all around
- finish > teak and holly 60mm > possible Bruynzeel Decora Sole Flooring T.B.D.
- margin boards > no margin boards
- hatch locking device > Southco E5-70-1627-701 + Southco E3-13-4
- sole supports > alu tubing 50x30
Fore Cabin[edit]
- bed storage > access from top & side
Salon[edit]
- folding table
- veneered top
- aluminium pillars diameter 120-180
- 10mm teak margin around table top
- hardware
- NO e-panel
- Safe > in SB bench under sole > integrated > yard made of aluminium 5mm (sketch will follow)
Galley[edit]
- Fridge > Frigomatic BI75 WATERCOOLED
- Freezer > Frigomatic BI53 > is it possible to place it under one of the three beds? AIRCOOLED
- Sink > Exalto 70.01.45
- Stove > Force 10 type (TECHNAUTIC 596122) Force 10 TECHNAUTIC 596122
- Foot pump > Belship 032610
- Faucet >
- fresh water T.B.D.
- salt water T.B.D.
Bathroom[edit]
- no sink
- shower mixer > T.B.D.
- shower head > T.B.D., can be integrated in ceiling if needed (for head room)
- drain > directly in floor
- mirror > at entrance door
- black water tank > Vetus ATANK 061 > position tbd by Navyk
Aft cabins[edit]
- entrance door > sliding door system Hasky 100
- boiler under bed > Webasto Basic 50 > CANCELED (will be outside interior)
Deck house[edit]
- aft area of deck house as Nescio/Pure (pillar boxes)
- chart tables > folding footrests by KMY
- chart tables > border of alu
Superstructure[edit]
- Skyscreen
- type Roller Surface 2 With Seal
- orientation is transverse sliding
Systems[edit]
HVAC[edit]
- KMY will provide drawing
Fire fighting[edit]
- KMY will provide model and quantity
Electrical system[edit]
- Battery > MASTERVOLT MLI Ultra 12/5000 art. nr. 66015000
- Sockets > Jung stainless steel mat ES 1520 NKI
Safety[edit]
- EPIRB MT403
- location in recess next to deckhouse entrance
Modeling refereneces[edit]
Tolerance[edit]
- distance to frame flanges 20
Lining[edit]
- deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)
Base ceiling[edit]
- superstructure
- offset 58 from inside shell
- after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
- interference with stringers <2, to be solved on board
Sheet estimation[edit]
Milling[edit]
- Subcontracted to CNCwerk
Aluminum[edit]
- mast bulkhead > cutout entrance door + heater hose
- aft bulkhead > cutout for heater hose
- bolt connection > create detail
People[edit]
- Eeuwe Kooi - director/owner (not directly involved)
- Willem Berends - chain manger (responsible for contract)
- Willem-Jan van der Vegt - engineer (our contactperson)
- Haaie Andringa - foreman carpentry
