Difference between revisions of "Nesting"
From NavykI
| Line 7: | Line 7: | ||
* units:mm | * units:mm | ||
*text style : KP arial narrow | *text style : KP arial narrow | ||
| − | 2.Check stock plate in manager | + | *2.Check stock plate in manager |
| − | 3.Create the Nest files. | + | *3.Create the Nest files. |
| − | 4.In every nest file insert nest plate. In general are 5 nest in a row with distance 500mm.Second row 1000 mm under. | + | *4.In every nest file insert nest plate. In general are 5 nest in a row with distance 500mm.Second row 1000 mm under. |
| − | 5.Insert the parts: array individually. | + | *5.Insert the parts: array individually. |
| − | 6. Nest the parts: first the big plates starting lower left corner. | + | *6. Nest the parts: first the big plates starting lower left corner. |
| − | 7.When nest is done assign the parts to the nest. | + | *7.When nest is done assign the parts to the nest. |
| − | 8.Navigator/unit/ check nests. If OK you get the message :0'' parts remain unnested!'' | + | *8.Navigator/unit/ check nests. If OK you get the message :0'' parts remain unnested!'' |
Revision as of 10:34, 11 March 2009
The process of efficiently positioning sheet parts in a sheet to reduce material waste.
Distance between parts 20mm
Nesting steps: 1.Set up nest template: ShipConstructor/navigator/templates/Nest01:
- units:mm
- text style : KP arial narrow
- 2.Check stock plate in manager
- 3.Create the Nest files.
- 4.In every nest file insert nest plate. In general are 5 nest in a row with distance 500mm.Second row 1000 mm under.
- 5.Insert the parts: array individually.
- 6. Nest the parts: first the big plates starting lower left corner.
- 7.When nest is done assign the parts to the nest.
- 8.Navigator/unit/ check nests. If OK you get the message :0 parts remain unnested!
