Difference between revisions of "14044 Luxe motor 38"

Revision as of 17:01, 3 October 2014

Questions

• Roof curvature
• Shared toilets for crew
• hydro-electric drive?

General

• Main dimensions:
  • LOA 38.50m
  • Dmax 1.40m
  • Air draft 3.35m (or 3.60m?)
  • BOA 4.95m
• Range - maximum 10 days
• Area
  • French channels
  • River Rhine
  • German channels
• Season:
  • At French Channels is May-October
  • Off season boats will sail to homeport Leeuwarden where they will be overhauled and used for daytrips/parties for groups of max 30 persons
• Booking agency Cumberly & Kent
• Misc:
  • State of the art technique
  • 5 star ship
  • Owner has shipping company with advanced ships where everything is operated electrical.
  • Walls between cabins and between cabins and public spaces will have optimum insulation to reduce sound transfer to the max.
  • ER as small as possible

Propulsion

• Diesel electric propulsion – SRF recently did a boat of LOA 25m / 25 kW which reached 7 km/h min. Potential electric engine supplier is Boumuller (Hybrid Ship Propulsion)
• Roof covered with solar panels
• Possibility of hydro propulsion as secondary
  • neccesary power for minimum speed of 7km/h (?? why 7??)
• Vessel shall sail in small channels electrical at low power without generator. Battery capacity to be calculated and applied for 1 day of sail.
• For additional power and where possible to replace combustion engines a large area of solar panels will be installed.
• Furthermore a shore connection for power supply and battery charge. An electric bow thruster in a tunnel in the foreship.
• Vessel will have 2 remote controlled ‘spudpalen’, 1 PS in foreship and 1 SB in aftship.
• Propulsion by means of electric propelled ‘rudder-propellor’. Electric power supply of rudder-propellor will have an automatic switch for batteries or generator.
• Power of rudder-propellor will be between 1-150 kW with frequence control. At full power the generator will provide the power.
• Two generators:
  • 180 KW full power sailing and board system
  • 50 KW low speed and board system
  • Generators to be in sound insulated boxes (whisper generators).
  • Generators to meet current, known and expected requirements regarding emission for European inland waterways.

Systems

Anchoring

• 2 pillars instead of anchors
• SRF – cofferdam with all tanks between ER and cabins, 2 frame distances of 450mm

Gray water

• Grey water can be drained overboard

Black water

• Black water must be stored

HVAC

• Heating, cooling and insulation will be calculated and executed in such a way that with outside temperatures of -20°C the interior can be kept at +23°C and with an outside temperature of +38°C the inside temperature can be kept at 18°C.
• The goal is to design the vessel in such a way that with minimum energy consume the guests and crew can be transported in great comfort.

Accomodation

General

• Guest and crew accommodation to meet all applicable, known and expected regulations for commercial transport on European inland waterways.
• Whirlpool on foreship

Crew

• Crew number - 5
  • Skipper / Captain with partner
  • Cook 1x
  • Hostess 2x
  • 1 double cabin for skipper w partner
  • 4 single cabins for cook and hostess
  • spare cabin available when skipper is without partner

Guests

• Passenger number - 10
• Cabins:
  • Windows and portholes with optimum sun and light screens
  • Great attention to be paid to maximum day light entry and view
  • Local adjustable heating of sufficient capacity
  • Good adjustable fresh air supply
  • light and belvedere
  • 5 identical double cabin

Wheelhouse

• Wheelhouse to have a seating area for guests
• Wheelhouse to have visibility to stern

Exterior

• Fore and aftdeck suitable for guests so they can spread over the boat and find some privacy.

Layout

• Idea is to have in foreship the crew accommodation, then 5 guest cabins, then engine room. Main deck: wheelhouse, galley, salon, aftdeck.
• Guests are usually elder so keep rollators in mind but boat does not need to be wheelchair accessible
• Keep boarding and stairs comfortable
• Classic look with original details

Toilets

• Bathroom to be spacious and a shower with all modern comfort.
• Separate toilet with bowl of standard hotel size (no ship type bowl)

Rules

• ‘kanalen kopschroef’ suitable for back up propulsion, requires full ER, minimum speed. Question is if back up is about propulsion or propulsion line, in latter case an electric engine with hollow shaft might work out.

RORS

Kapitel 15

• 15.01 General provisions
  • 1 - The following provisions shall not apply
    • 3.02 No 1 letter b
    • 1.4 to 3.4
    • 8.08 No 2 sentence 2 and No 7
    • 14.9 No 3 sentence 2 with nominal voltages above 50V.
  • 2 - Provisions regarding liquefied gas (not interesting)
  • 3 - Vessels without means of self propulsion are not allowed to carry passengers
  • 4 - On passenger vessels, areas for use by persons with reduced mobility shall be provided, which satisfy the requirements referred to in this chapter. If the provisions referred to in this chapter, which take into account the specific safety needs of persons with reduced mobility, are difficult in practice or involve unreasonably high costs, the inspection body may allow derogations from these provisions subject to recommendations by the Central Commission for Navigation on the Rhine. These derogations must be entered in the Community certificate.

• 15.02 Hull
  • 1 - The thickness of the outside shell shall be determined according 2.09
    • a - gives the min thickness formula
    • b - the minimum thickness according point a can be reduced if it can be demonstrated by calculation a sufficient longitudinal, lateral and local strength
    • c - absolute min thickness is 3mm no matter the results from point a and b
  • 2 - The position and number of bulkheads will be determined in accordance with § 15.03 No 7 to 13 .each part of the structure that affects the integrity of the subdivisions should be watertight and should be designed to maintain the integrity of the subdivision
  • 3 - The distance between the collision bulkhead and the forward perpendicular shall not be less than 0.04 x LWL and not exceed LWL x 0.04 + 2 m
  • 4 - A transverse bulkhead may be fitted with a bulkhead recess, if all parts of this offset lie within the safe area.
  • 5 - The bulkheads, which were taken into account in the damaged stability calculation according to § 15.3 no. 7-13 must be watertight and be installed up to the bulkhead deck.
  • 6 - The number of openings in these bulkheads shall be kept as low as is compatible with the design and proper working of the ship. Openings and penetrations shall not adversely affect the watertight function of the bulkheads.
  • 7 - Collision bulkheads shall have no openings and no doors.
  • 8 - Bulkheads between engineroom and crew or passenger accomodation shall have no doors.
  • 9 - Manually operated watertight doors without remote control are permitted in passenger areas only if:
    • - they remain closed and may be opened only temporarily to allow access;
    • - they can be closed by suitable devices quickly and safely;
    • - they are provided on both sides of the doors with the following inscription: "Close door immediately after passing ".
  • 10 - Doors in bulkheads referred to in section 5 that are open for long periods shall meet the following requirements:
    • - They shall be closed from both sides of the bulkhead and from an easily accessible position above the bulkhead deck.
    • - After remotely closing the doors, they must reopen and close safely. The Closure shall not be impeded by carpeting or foot rails.
    • - The duration of the remote-controlled closure process shall be at least 30 seconds but not more than 60 seconds.
    • - During the closure procedure an audible alarm must automatically be given at the door.
    • - It must be ensured that door drive and alarm shall also function independently from the wheelhouse. A closed/opened indicator should be provided at the remote control location.(not sure of the translation of the last part)
  • 11 ....
  • 12 - In the wheelhouse, a warning system shall be provided to indicate which door is open in bulkheads referred to in paragraph 5.
  • 13 - Pipelines with open mouths and ventilation ducts shall be so laid that in any conceivable flooding over adjacent spaces or tanks:(Chinese.... i'll come on this one later...maybe in a year or so..)
  • 14 - Something regarding remote control of watertight doors
  • 15 - Double bottom N/A
  • 16 - Windows may be situated below the margin line if they are watertight, can not be opened, possess sufficient strength and meet the requirements of § 15.06 No.14.

• 15.03 Stability
  • 1 - The stability calculations shall be done considering the vessel is free of trim. The empty vessel's stability characteristics shall be verified by an inclining test.
  • 2 - The intact stability shall be calculated for the following standard load conditions:
    • - a) departure condition: 100% passengers, 98% fuel and fresh water, 10% waste water;
    • - b) while driving 100% passengers, 50% fuel and fresh water, 50% waste water;
    • - c) arriving condition 100% passengers, 10% fuel and fresh water, 98% waste water;
    • - d) empty vessel: no passengers, 10% fuel and fresh water, no waste water.
    • - For all standard load conditions, the ballast tanks are either empty or full in accordance with normal use.
    • - In addition, the proof of point 3 letter d must be provided for the following load condition:
      • - 100% passengers, 50% fuel and fresh water, 50% waste water, all other liquid tanks, including ballast, filled to 50%.
  • 3 - The intact stability of the vessel with the loading cases mentioned in number 3 a to d should be verified with the following criterias:
    • - a) The maximum righting lever hmax shall occur at a heeling angle φmax ≥ (φmom + 3°) and must be at least 0.20 m. If the flooding angle φf < φmax, then the righting lever at the angle of flooding φf shall be at least 0,20 m.
    • - b) The flooding angle φf should not be less than (φmom + 3 °).
    • - c) The area A under the curve of righting levers shall, depending on the location of φf and φmax reach at least the following values​​:
      • ghnjf
• 15.04 Freeboard
• 15.05 Maximum permitted number of passengers
• 15.06 Passenger rooms and areas
• 15.07 Drive system
• 15.08 Safety devices and equipment
• 15.09 life-saving appliances
• 15.10 electrical installations
• 15.11 Fire Protection
• 15.12 Firefighting
• 15.13 security organization
• 15.14 Facilities for the collection and disposal of domestic waste water
• 15.15 Derogations for certain passenger vessels

other

• ----
• ----