Difference between revisions of "15007 Bestevaer 45 ST Jongedame"

Revision as of 11:15, 14 September 2015

Jongedame is the second boat from the new 'Pure' line of yachts.

Scope

• detailed 3D model
• general detail sheet
• CNC milling files (for all panel parts, drill holes not included)
• assembly drawings (with indication for bevels & edgeband)
• list of hardware & appliances
• weight brut + net + COG

Planning

• Delivery W47

TO DO

Parts

Solid model

General

Sole

Base sole primary model done

Forecabin

Salon

Galley

Bathroom

Aft ship

Superstructure

Sole structure

Other files

Overlength

Navyk remarks for KMY

General

• • outlets > HIP?

INFO

General

• driver-drill
  • total length including bit > 210mm
  • distance shaft center to top of housing > 36mm

hatches and portlights

• Deckhatches:
  • Lewmar Size 60 low profile: 39960030
    • Skyscreens
• Portligths in superstructure:
  • Lewmar Standard portlight Size 3: 393320200
• Portlights in cockpit:
  • Lewmar Standard portlight Size 5: 393520200

hardware

walls

• panels > 17-HPH-15 RAL 9010
• round corners > solid teak, varnished

lining

• panels > 12-HPH-10 RAL 9010
• knuckles are permitted minimum width 300

ceilings

• as Nescio/Pure (15038)
• lighting > EB12/EB/22?flex-05

entrance doors

• panels > RAL 9010
• sliding door system > Husky 100: http://www.henderson.nl/sliding_door_gear_list.php?config=Straight+Sliding&category=Domestic
• hinges > Kroon 353241
• mortise lock > Kroon 735831
• handles > bathroom - Foresti & Suardi 480A (Kroon S355945)
• door lock button > bathroom - Foresti & Suardi 481C (Kroon S352419)
• height doorhandles?
• sliding door catch?

lockers

• panels > 12-HPH-10 RAL 9010 and 17-HPH-15 RAL 9010
• round corners > solid teak, varnished
• solid profiles > teak, varnished
• galley > lower cabinets > Alu HPL
• galley > counter top > Corian TBD
• shelves > mounted with shelf supports Kroon 342354 (Hettich 0053012)
• sliding door system > Husky 50: http://www.henderson.nl/sliding_door_gear_list.php?config=Straight+Sliding&category=Domestic
• hinges > Hettich Intermat Soft 9943 > Kroon 356850 (Hettich 1031071)
• closing device > Kroon 374965
• drawers > proposal by Navyk
• securing ledge > aluminum panel 5mm, make grooves fitting 5mm Al dividers

seats

• seat cushion thickness 120?
• back vertical ?

berths

• matrass thickness 120mm
• ventilation holes in bed panel

Sole

• base > 18mm ocoume, varnished all around
• finish > Teak veneer: Bruynzel Decora Sole Flooring - T.B.D.
• margin boards > no margin boards
• hatch locking device > Southco E5-70-1627-701 + Southco E3-13-4

Fore Cabin

• bed storage > access from top & side

Salon

• folding table
  • veneered top
  • aluminium pillars diameter 120-180
  • 10mm teak margin around table top
  • hardware

Galley

• fridge: FRIGOMATIC BI75
  • top loading
• sink > Exalto 70.01.45: http://www.exalto.com/nl-nl/dubbele-wasbak-rechthoekig-rvs-600x320mm-70.01.45
• stove > Force 10 type (TECHNAUTIC 596122) http://www.dekkerwatersport.nl/pdf/rocaset.pdf
• foot pump Belship 032610: http://www.jachtbouwloedeman.nl/watersportwinkel/water-tanksystemen/drinkwater-systemen/whale-gusher-galley-mk3-whale-gusher-galley-mk3-032610/032610/2450/
• faucet >
  • fresh water T.B.D.
  • salt water T.B.D.
• Safe > aluminium integrated > yard made
• Freezer > Webasto Build-In Box BI53(http://www.indelwebastomarine.com/int/products/fridges-freezers/built-in-boxes/) > is it possible to place it under one of the three beds?

Bathroom

• no sink
• shower mixer > T.B.D.
• shower head > T.B.D.
• shower integrated in ceiling if needed (for head room)
• drain directly in floor
• mirror glued on inside door plate

Aft cabins

• entrance door > sliding door system Hasky 100
• boiler under bed
• opening steps - teak veneered with 10mm solid Teak margins

Deck house

• detailed metal construction for 'laptop tables' aft PS&SB
• hardware folding footrest aft PS&SB - T.B.D.

Superstructure

• Skyscreen
  • type Roller Surface 2 With Seal
  • orientation is transverse sliding

Modeling refereneces

Tolerance

• distance to frame flanges 20

Lining

• deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)

Base ceiling

• superstructure
  • offset 58 from inside shell
  • after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
  • interference with stringers <2, to be solved on board

Sheet estimation

Milling

• Subcontracted to CNCwerk

Aluminum

• mast bulkhead > cutout entrance door + heater hose
• aft bulkhead > cutout for heater hose
• bolt connection > create detail

People

• Eeuwe Kooi - director/owner (not directly involved)
• Willem Berends - chain manger (responsible for contract)
• Willem-Jan van der Vegt - engineer (our contactperson)
• Haaie Andringa - foreman carpentry

Exchange work

As discussed

Structure model - modifications!