Difference between revisions of "Nesting"
From NavykI
Line 1: | Line 1: | ||
− | The process of efficiently positioning | + | The process of efficiently positioning plate parts in a sheet to reduce material waste. |
Distance between parts 20mm | Distance between parts 20mm | ||
Line 9: | Line 9: | ||
*04.In every nest file insert nest plate.0,0 insertion point. In general are 5 nest in a row with distance 500mm.Second row 1000 mm under. | *04.In every nest file insert nest plate.0,0 insertion point. In general are 5 nest in a row with distance 500mm.Second row 1000 mm under. | ||
*05.Insert the parts: array individually. | *05.Insert the parts: array individually. | ||
− | *06. Nest the parts: first the big plates starting lower left corner. | + | *06.Nest the parts: first the big plates starting lower left corner. |
*07.When nest is done assign the parts to the nest. | *07.When nest is done assign the parts to the nest. | ||
− | *08. | + | *08.Nest/Check collision.Rearenge parts if necessary. |
− | *09. | + | *09.Update nest and BOM. |
− | *10.Delete content of Nestprt folder after every check nest. | + | *10.Add a calibration plates in every nest using tool pallete. |
− | * | + | *11.Delete content of '''Nestprt''' from project folder folder after every check nest. |
− | + | *12.Navigator/Unit/check nests. If '''OK''' you get the message :0'' parts remain unnested!''. | |
− | * | + | *13.Empty Nesprt folder. |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | If the nest is ready and still 1 or 2 parts were modified than: | + | If after Navigator/Unit/check nests you get results with text : parts moved to REV layer,than the steps are: |
− | * | + | *01.Delete content of Nestprt folder |
+ | *02.Nest/Check nests | ||
+ | *03.Nest/Reinsert parts. | ||
+ | *04.Insert remaining parts if existing and nest them. | ||
+ | *05.Nest/Check colision.Rearenge if necessary. | ||
+ | *06.Assign to nest | ||
+ | *07.Update nest and BOM. | ||
+ | *08.Navigator/Unit/check nests. If '''OK''' you get the message :0'' parts remain unnested!''. | ||
+ | |||
+ | If the nest is ready and still 1 or 2 parts were modified and you now the name of the parts than: | ||
+ | *01.Delete content of Nestprt folder | ||
+ | *02.Nest/part list/ find the part/ select it and than Nest/ part/Reinsert. | ||
+ | *03.Assign to nest. | ||
+ | *04.Update nest and BOM. | ||
[[Category:Marine Engineering]] [[Category:ShipConstructor]] | [[Category:Marine Engineering]] [[Category:ShipConstructor]] |
Revision as of 12:58, 2 June 2009
The process of efficiently positioning plate parts in a sheet to reduce material waste.
Distance between parts 20mm
Nesting steps:
- 01.Set up nest template: ShipConstructor/navigator/templates/Nest01:units:mm, text style : KP arial narrow
- 02.Check stock plate in manager
- 03.Create the Nest files.
- 04.In every nest file insert nest plate.0,0 insertion point. In general are 5 nest in a row with distance 500mm.Second row 1000 mm under.
- 05.Insert the parts: array individually.
- 06.Nest the parts: first the big plates starting lower left corner.
- 07.When nest is done assign the parts to the nest.
- 08.Nest/Check collision.Rearenge parts if necessary.
- 09.Update nest and BOM.
- 10.Add a calibration plates in every nest using tool pallete.
- 11.Delete content of Nestprt from project folder folder after every check nest.
- 12.Navigator/Unit/check nests. If OK you get the message :0 parts remain unnested!.
- 13.Empty Nesprt folder.
If after Navigator/Unit/check nests you get results with text : parts moved to REV layer,than the steps are:
- 01.Delete content of Nestprt folder
- 02.Nest/Check nests
- 03.Nest/Reinsert parts.
- 04.Insert remaining parts if existing and nest them.
- 05.Nest/Check colision.Rearenge if necessary.
- 06.Assign to nest
- 07.Update nest and BOM.
- 08.Navigator/Unit/check nests. If OK you get the message :0 parts remain unnested!.
If the nest is ready and still 1 or 2 parts were modified and you now the name of the parts than:
- 01.Delete content of Nestprt folder
- 02.Nest/part list/ find the part/ select it and than Nest/ part/Reinsert.
- 03.Assign to nest.
- 04.Update nest and BOM.