Difference between revisions of "CNCwerk"
From NavykI
(Created page with "*[http://www.cncwerk.nl/ CNC werk], owner Jules Bosma *Tools **router bit Ø10 and Ø20 **router bit V 45° **router bit V 60° (markings) **drill Ø3.0 (smallest) **drill Ø5...") |
|||
| Line 1: | Line 1: | ||
*[http://www.cncwerk.nl/ CNC werk], owner Jules Bosma | *[http://www.cncwerk.nl/ CNC werk], owner Jules Bosma | ||
| − | + | ||
| + | == Tools == | ||
**router bit Ø10 and Ø20 | **router bit Ø10 and Ø20 | ||
**router bit V 45° | **router bit V 45° | ||
| Line 6: | Line 7: | ||
**drill Ø3.0 (smallest) | **drill Ø3.0 (smallest) | ||
**drill Ø5.0 | **drill Ø5.0 | ||
| + | |||
| + | == Drafting == | ||
*Layers | *Layers | ||
**for each tool | **for each tool | ||
| Line 17: | Line 20: | ||
**mark with 'dot' (AutoCAD) | **mark with 'dot' (AutoCAD) | ||
*Narrow strips > milled full depth minus 1mm (so strips in an 18mm sheet will be milled 17mm deep and will remain in the sheet) | *Narrow strips > milled full depth minus 1mm (so strips in an 18mm sheet will be milled 17mm deep and will remain in the sheet) | ||
| − | + | ||
| + | == Labels == | ||
**file format excel | **file format excel | ||
**each info line in a column | **each info line in a column | ||
Revision as of 10:01, 24 August 2015
- CNC werk, owner Jules Bosma
Tools
- router bit Ø10 and Ø20
- router bit V 45°
- router bit V 60° (markings)
- drill Ø3.0 (smallest)
- drill Ø5.0
Drafting
- Layers
- for each tool
- for each router bits per contour (outside / inside / inset)
- Contours
- closed polylines
- no curves
- no splines
- Drilling holes
- layer per diameter per depth
- mark with 'dot' (AutoCAD)
- Narrow strips > milled full depth minus 1mm (so strips in an 18mm sheet will be milled 17mm deep and will remain in the sheet)
Labels
- file format excel
- each info line in a column
- at least showing part ID and sheet ID (so 2 columns)
- if possible show material ID (3 columns)
