Difference between revisions of "15007 Bestevaer 45 ST Jongedame"
From NavykI
(→Galley) |
(→Bathroom) |
||
| Line 146: | Line 146: | ||
*no sink | *no sink | ||
*shower mixer > T.B.D. | *shower mixer > T.B.D. | ||
| − | *shower head > T.B.D. | + | *shower head > T.B.D., can be integrated in ceiling if needed (for head room) |
| − | + | *drain > directly in floor | |
| − | *drain directly in floor | + | *mirror > at entrance door |
| − | *mirror | ||
===Aft cabins=== | ===Aft cabins=== | ||
Revision as of 10:36, 14 September 2015
Jongedame is the second boat from the new 'Pure' line of yachts.
Contents
Scope
- detailed 3D model
- general detail sheet
- CNC milling files (for all panel parts, drill holes not included)
- assembly drawings (with indication for bevels & edgeband)
- list of hardware & appliances
- weight brut + net + COG
Planning
- Delivery W47
TO DO
Parts
Solid model
General
Sole
Base sole primary model done
Forecabin
Salon
Galley
Bathroom
Aft ship
Superstructure
Sole structure
Other files
Overlength
General
-
- outlets > HIP?
INFO
General
- driver-drill
- total length including bit > 210mm
- distance shaft center to top of housing > 36mm
hatches and portlights
- Deckhatches:
- Lewmar Size 60 low profile: 39960030
- Portligths in superstructure:
- Lewmar Standard portlight Size 3: 393320200
- Portlights in cockpit:
- Lewmar Standard portlight Size 5: 393520200
hardware
walls
- panels > 17-HPH-15 RAL 9010
- round corners > solid teak, varnished
lining
- panels > 12-HPH-10 RAL 9010
- knuckles > permitted, minimum width 300
ceilings
- as Nescio/Pure (15038)
- lighting > EB12/EB/22?flex-05
entrance doors
- panels > RAL 9010
- sliding door system > Husky 100 aluminum
- hinges > Kroon 353241
- mortise lock > Kroon 735831
- handles > bathroom - Foresti & Suardi 480A (Kroon S355945)
- door lock button > bathroom - Foresti & Suardi 481C (Kroon S352419)
- height doorhandles?
- sliding door catch?
lockers
- panels > 12-HPH-10 RAL 9010 and 17-HPH-15 RAL 9010
- round corners > solid teak, varnished
- solid profiles > teak, varnished
- galley > lower cabinets > Alu HPL
- galley > counter top > Marlan 12mm, color tbd
- shelves > mounted with shelf supports Kroon 342354 (Hettich 0053012)
- sliding door system > Husky 50
- hinges > Hettich Intermat Soft 9943 > Kroon 356850 (Hettich 1031071)
- closing device > Kroon 374965
- drawers > proposal by Navyk
- securing ledge > aluminum panel 5mm, make grooves fitting 5mm Al dividers
seats
- seat cushion thickness 120
- back vertical ?
berths
- matrass thickness 120mm
- ventilation holes in bed panel
Sole
- base > 18mm ocoume, varnished all around
- finish > Teak veneer: Bruynzel Decora Sole Flooring - T.B.D.
- margin boards > no margin boards
- hatch locking device > Southco E5-70-1627-701 + Southco E3-13-4
Fore Cabin
- bed storage > access from top & side
Salon
- folding table
- veneered top
- aluminium pillars diameter 120-180
- 10mm teak margin around table top
- hardware
Galley
- Fridge > Frigomatic BI75
- Freezer > Frigomatic BI53 > is it possible to place it under one of the three beds?
- Sink > Exalto 70.01.45
- Stove > Force 10 type (TECHNAUTIC 596122) Force 10 TECHNAUTIC 596122
- Foot pump > Belship 032610
- Faucet >
- fresh water T.B.D.
- salt water T.B.D.
- Safe > aluminium integrated > yard made
Bathroom
- no sink
- shower mixer > T.B.D.
- shower head > T.B.D., can be integrated in ceiling if needed (for head room)
- drain > directly in floor
- mirror > at entrance door
Aft cabins
- entrance door > sliding door system Hasky 100
- boiler under bed
- opening steps - teak veneered with 10mm solid Teak margins
Deck house
- detailed metal construction for 'laptop tables' aft PS&SB
- hardware folding footrest aft PS&SB - T.B.D.
Superstructure
- Skyscreen
- type Roller Surface 2 With Seal
- orientation is transverse sliding
Modeling refereneces
Tolerance
- distance to frame flanges 20
Lining
- deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)
Base ceiling
- superstructure
- offset 58 from inside shell
- after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
- interference with stringers <2, to be solved on board
Sheet estimation
Milling
- Subcontracted to CNCwerk
Aluminum
- mast bulkhead > cutout entrance door + heater hose
- aft bulkhead > cutout for heater hose
- bolt connection > create detail
People
- Eeuwe Kooi - director/owner (not directly involved)
- Willem Berends - chain manger (responsible for contract)
- Willem-Jan van der Vegt - engineer (our contactperson)
- Haaie Andringa - foreman carpentry
