15007 Bestevaer 45 ST Jongedame

'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY).

Scope

• detailed 3D model
• general detail sheet
• CNC milling files (for all panel parts, drill holes not included)
• assembly drawings (with indication for bevels & edgeband)
• list of hardware & appliances
• weight brut + net + COG

Planning

• Delivery W47

Navyk remarks for KMY

General

• • outlets > HIP?

INFO

General

• driver-drill
  • total length including bit > 210mm
  • distance shaft center to top of housing > 36mm

hatches and portlights

• Deckhatches:
  • Lewmar Size 60 low profile: 39960030
  • Lewmar Size 30 low profile: 39930030
    • Skyscreens
• Portligths in superstructure:
  • Lewmar Standard portlight Size 3: 393320200
• Portlights in cockpit:
  • Lewmar Standard portlight Size 5: 393520200

hardware

• finish > stainless steel

lining

• V-grooves, every 100mm, parallel to deckline/sheer

ceilings

• leather panels > mounted with Fastmount

entrance doors

• door width net standard > 560mm
• door width net minimum > 500mm
• gap under door > ?
• core > plywood ocoume 18mm
• cover panels > plywood bamboo 7mm
• hinges?
• mortise lock?
• handles?
• door plates/shields?
• height doorhandles?
• door catch?
• ajar hook?

lockers

• shelves > mounted with shelf supports (Hettich)
• FYI > solid corner profiles in furniture plintes will be painted white
• hinges > Hettich Intermat Soft....
• drawer runners > Hettich Quadro 30
• closing device > Kroon 372369
• shelf supports

seats

• seat cushion thickness 100mm
• back vertical
• seat panel 340mm above sole

berths

• matrass thickness 100mm
• bed slats 40 mm from Spacerflex

Sole

• base > 18mm ocoume, varnished all around
• finish > chest nut
• margin boards > width 70mm
• hatch locking device > see material list

Galley

• Drawers
  • PDF info: P:\15038 Bestevaer 45 ST Pure\Inbox\70 Interior\Arcitech drawers
  • Hettich Arcitech drawers st.steel > [1]
• fridge is a Webasto
  • CR 85 EL - first choice
  • CR 65 EL - second choice
  • front to be white
• sink > Belship 0430331515CS
• stove > Force 10 F63356
  • gimbal 30°
• faucet > Damixa Willow Kitchen Chrome

Bathroom

• black water tank > behind toilet, 2 options:
  • preferred option (60L)
  • second option
• glass doors > semi standard product
• sink > Belship 043018
• faucet > [ http://www.badkamerwinkel.nl/damixa-willow-wastafelkraan-met-klik-waste-chroom-358210000 Damixa Willow Bathroom faucet chrome]
• showermixer > Damixa Willow Showermixer chrome
• shower head > Damixa hand shower chrome

Aft cabins

• entrance door > rotates inside

Superstructure

• Skyscreen
  • type Roller Surface 2 With Seal
  • orientation is transverse sliding

Modeling refereneces

Tolerance

• distance to frame flanges 20

Lining

• deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)

Base ceiling

• superstructure
  • offset 58 from inside shell
  • after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
  • interference with stringers <2, to be solved on board

Sheet estimation

transverse grain

• 17mm single bamboo - 3 sheets - bench fronts SL / galley front / table sides
• 6mm single bamboo - 1 sheet - bench fronts DH

Milling

• Subcontracted to CNCwerk

Aluminum

• mast bulkhead > bolted? requires hatch in bed
• mast bulkhead > cutout entrance door + heater hose
• aft bulkhead > cutout for heater hose
• galley > pillar
• bolt connection > create detail

People

• Eeuwe Kooi - director/owner (not directly involved)
• Willem Berends - chain manger (responsible for contract)
• Willem-Jan van der Vegt - engineer (our contactperson)
• Haaie Andringa - foreman carpentry

Exchange work

• KMY negotiated €1.000 discount for delivering a 3D model of interior - send file is only a block file
• integration of heater ducting is not in contract
• info is not delivered on Monday, June 15 but came partially on June 16 and 17

As discussed

July 1, 2015

• furniture doors - 17mm is OK
• entrance hatch recess box - PUR insulated, put plywood panel in front
• stair steps solid wood
• cockpit sole - covered with cork 9mm
• lining - leather panels are canceled
• porthole boxes - yard makes tube, out of our delivery

June 16, 2015

• black water tank - to be determined by Navyk, volume around 50 liter, position SB behind toilet

June 11,2015

• tolerances
  • vertical:
    • sole to supporting structure - 0mm
    • ceiling to structure - 0mm
  • horizontal
    • clearance from inner frame contour - 20mm (space between frames is reserved for systems)
• insulation type is PUR
• grain orientation will be vertical
• sole supports are alu tube 50x30x?
• cabinet interiors to be white
• KMY workshop facilities:
  • no veneer press
  • edge band machine for straight edges
  • lamello machine
  • round router bits R6, R8, R10, R12
• Navyk will route the ducting for airheating through the interior
• Navyk is free to use their own material naming
• Navyk will give a price offer for the aluminium sole supports

Structure model - modifications!

• Forepeak bulkhead - stiffeners will be on aft side (cabin side)
• Pilothouse - between the windows will be a vertical T-profile with a web of 50x6 and a flange of 50x8
• Entrance door forecabin - to be determined by Navyk, it will be a joinery door, not an aluminum door
• sole structure - to be determined, Navyk will make a price offer for this