15007 Bestevaer 45 ST Jongedame

'Pure' is the name of new line of yachts, of which the first boat is named 'Nescio'. This first boat will be build for Eeuwe Kooi himself (owner/director KMY).

Scope

• detailed 3D model
• general detail sheet
• CNC milling files (for all panel parts, drill holes not included)
• assembly drawings (with indication for bevels & edgeband)
• list of hardware & appliances
• weight brut + net + COG

Planning

• Delivery W47

TO DO

Solid model

Sole

Base sole primary model done

Navyk remarks for KMY

General

• • outlets > HIP?

INFO

General

• driver-drill
  • total length including bit > 210mm
  • distance shaft center to top of housing > 36mm

hatches and portlights

• Deckhatches:
  • Lewmar Size 60 low profile: 39960030
    • Skyscreens
• Portligths in superstructure:
  • Lewmar Standard portlight Size 3: 393320200
• Portlights in cockpit:
  • Lewmar Standard portlight Size 5: 393520200

walls

• horizontal grooves, height aprox. 300mm
• solid Teak round corner elements

lining

• can be with knuckles, minimum width 300mm

ceilings

• White HPL panels
• lighting > EB12/EB/22?flex-05

entrance doors

• HPL RAL 9010
• sliding door system > Husky 100: http://www.henderson.nl/sliding_door_gear_list.php?config=Straight+Sliding&category=Domestic
• hinges > Kroon 353241
• mortise lock > Kroon 735831
• handles > bathroom - Foresti & Suardi 480A (Kroon S355945)
• door lock button > bathroom - Foresti & Suardi 481C (Kroon S352419)
• height doorhandles?
• sliding door catch?

lockers

• solid Teak round corner elements
• shelves > mounted with shelf supports Kroon 342354 (Hettich 0053012)
• sliding door system > Husky 50: http://www.henderson.nl/sliding_door_gear_list.php?config=Straight+Sliding&category=Domestic
• hinges > Hettich Intermat Soft 9943 > Kroon 356850 (Hettich 1031071)
• closing device > Kroon 374965

seats

• seat cushion thickness 120?
• back vertical ?

berths

• matrass thickness 120mm
• holes in bed panel

Sole

• base > 18mm ocoume, varnished all around
• finish > Teak veneer: Bruynzel Decora Sole Flooring - T.B.D.
• margin boards > no margin boards
• hatch locking device > Southco E5-70-1627-701 + Southco E3-13-4

Fore Cabin

• storage access from top & side

Salon

• folding table
  • veneered top
  • aluminium pillars diameter 120-180
  • 10mm teak margin around table top
  • hardware

Galley

• Aluminium style HPL 17mm
• solid Teak round corner elements
• Corian countertop - T.B.D.
• drawers > type of opening to discuss (drawer runners or not)
• dividers inside - to make grooves fitting 5mm Al dividers
• fridge: FRIGOMATIC BI75
  • top loading
• sink > Exalto 70.01.45: http://www.exalto.com/nl-nl/dubbele-wasbak-rechthoekig-rvs-600x320mm-70.01.45
• stove > Force 10 type (TECHNAUTIC 596122) http://www.dekkerwatersport.nl/pdf/rocaset.pdf
• foot pump Belship 032610: http://www.jachtbouwloedeman.nl/watersportwinkel/water-tanksystemen/drinkwater-systemen/whale-gusher-galley-mk3-whale-gusher-galley-mk3-032610/032610/2450/
• faucet >
  • fresh water T.B.D.
  • salt water T.B.D.
• Aluminium integrated safe

Bathroom

• without sink
• shower mixer > T.B.D.
• shower head > T.B.D.
• shower integrated in ceiling if needed (for head room)
• drain directly in floor
• mirror glued on inside door plate

Aft cabins

• entrance door > sliding door system Hasky 100
• boiler under bed
• opening steps - teak veneered with 10mm solid Teak margins

Deck house

• detailed metal construction for 'laptop tables' aft PS&SB
• hardware folding footrest aft PS&SB - T.B.D.

Superstructure

• Skyscreen
  • type Roller Surface 2 With Seal
  • orientation is transverse sliding

Modeling refereneces

Tolerance

• distance to frame flanges 20

Lining

• deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)

Base ceiling

• superstructure
  • offset 58 from inside shell
  • after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
  • interference with stringers <2, to be solved on board

Milling

• Subcontracted to CNCwerk

Aluminum

• mast bulkhead > cutout entrance door + heater hose
• aft bulkhead > cutout for heater hose
• bolt connection > create detail

People

• Eeuwe Kooi - director/owner (not directly involved)
• Willem Berends - chain manger (responsible for contract)
• Willem-Jan van der Vegt - engineer (our contactperson)
• Haaie Andringa - foreman carpentry