CNCwerk

• CNC werk, owner Jules Bosma

Tools

• router bit Ø10 and Ø20
• router bit V 45°
• router bit V 60° (markings)
• drill Ø3.0 (smallest)
• drill Ø5.0

Drafting

• Layers
  • for each tool
  • for each router bits per contour (outside / inside / inset)
• Contours
  • closed polylines
  • no curves
  • no splines
• Drilling holes
  • layer per diameter per depth
  • mark with 'dot' (AutoCAD)
• Narrow strips > milled full depth minus 1mm (so strips in an 18mm sheet will be milled 17mm deep and will remain in the sheet)

Labels

• • file format excel
  • each info line in a column
  • at least showing part ID and sheet ID (so 2 columns)
  • if possible show material ID (3 columns)