15007 Bestevaer 45 ST Jongedame

Jongedame is the second boat from the new 'Pure' line of yachts.

Scope

• detailed 3D model
• general detail sheet
• CNC milling files (for all panel parts, drill holes not included)
• assembly drawings (with indication for bevels & edgeband)
• list of hardware & appliances
• weight brut + net + COG

Planning

• Delivery W47

TO DO

Solid model

Sole

Base sole primary model done

Navyk remarks for KMY

General

• • outlets > HIP?

INFO

General

• driver-drill
  • total length including bit > 210mm
  • distance shaft center to top of housing > 36mm

hatches and portlights

• Deckhatches:
  • Lewmar Size 60 low profile: 39960030
    • Skyscreens
• Portligths in superstructure:
  • Lewmar Standard portlight Size 3: 393320200
• Portlights in cockpit:
  • Lewmar Standard portlight Size 5: 393520200

walls

• panels > 17-HPH-15 RAL 9010
• round corners > solid Teak

lining

• can be with knuckles, minimum width 300mm

ceilings

• White HPL panels
• lighting > EB12/EB/22?flex-05

entrance doors

• HPL RAL 9010
• sliding door system > Husky 100: http://www.henderson.nl/sliding_door_gear_list.php?config=Straight+Sliding&category=Domestic
• hinges > Kroon 353241
• mortise lock > Kroon 735831
• handles > bathroom - Foresti & Suardi 480A (Kroon S355945)
• door lock button > bathroom - Foresti & Suardi 481C (Kroon S352419)
• height doorhandles?
• sliding door catch?

lockers

• solid Teak round corner elements
• shelves > mounted with shelf supports Kroon 342354 (Hettich 0053012)
• sliding door system > Husky 50: http://www.henderson.nl/sliding_door_gear_list.php?config=Straight+Sliding&category=Domestic
• hinges > Hettich Intermat Soft 9943 > Kroon 356850 (Hettich 1031071)
• closing device > Kroon 374965

seats

• seat cushion thickness 120?
• back vertical ?

berths

• matrass thickness 120mm
• ventilation holes in bed panel

Sole

• base > 18mm ocoume, varnished all around
• finish > Teak veneer: Bruynzel Decora Sole Flooring - T.B.D.
• margin boards > no margin boards
• hatch locking device > Southco E5-70-1627-701 + Southco E3-13-4

Fore Cabin

• storage access from top & side

Salon

• folding table
  • veneered top
  • aluminium pillars diameter 120-180
  • 10mm teak margin around table top
  • hardware

Galley

• Aluminium style HPL 17mm
• solid Teak round corner elements
• Corian countertop - T.B.D.
• drawers > type of opening to discuss (drawer runners or not)
• dividers inside - to make grooves fitting 5mm Al dividers
• fridge: FRIGOMATIC BI75
  • top loading
• sink > Exalto 70.01.45: http://www.exalto.com/nl-nl/dubbele-wasbak-rechthoekig-rvs-600x320mm-70.01.45
• stove > Force 10 type (TECHNAUTIC 596122) http://www.dekkerwatersport.nl/pdf/rocaset.pdf
• foot pump Belship 032610: http://www.jachtbouwloedeman.nl/watersportwinkel/water-tanksystemen/drinkwater-systemen/whale-gusher-galley-mk3-whale-gusher-galley-mk3-032610/032610/2450/
• faucet >
  • fresh water T.B.D.
  • salt water T.B.D.
• Aluminium integrated safe

Bathroom

• without sink
• shower mixer > T.B.D.
• shower head > T.B.D.
• shower integrated in ceiling if needed (for head room)
• drain directly in floor
• mirror glued on inside door plate

Aft cabins

• entrance door > sliding door system Hasky 100
• boiler under bed
• opening steps - teak veneered with 10mm solid Teak margins

Deck house

• detailed metal construction for 'laptop tables' aft PS&SB
• hardware folding footrest aft PS&SB - T.B.D.

Superstructure

• Skyscreen
  • type Roller Surface 2 With Seal
  • orientation is transverse sliding

Modeling refereneces

Tolerance

• distance to frame flanges 20

Lining

• deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)

Base ceiling

• superstructure
  • offset 58 from inside shell
  • after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
  • interference with stringers <2, to be solved on board

Milling

• Subcontracted to CNCwerk

Aluminum

• mast bulkhead > cutout entrance door + heater hose
• aft bulkhead > cutout for heater hose
• bolt connection > create detail

People

• Eeuwe Kooi - director/owner (not directly involved)
• Willem Berends - chain manger (responsible for contract)
• Willem-Jan van der Vegt - engineer (our contactperson)
• Haaie Andringa - foreman carpentry