15007 Bestevaer 45 ST Jongedame

Jongedame is the second boat from the new 'Pure' line of yachts.

Scope

• detailed 3D model
• general detail sheet
• CNC milling files (for all panel parts, drill holes not included)
• assembly drawings (with indication for bevels & edgeband)
• list of hardware & appliances
• weight brut + net + COG

Planning

• Delivery W47

TO DO

Solid model

Sole

Base sole primary model done

Navyk remarks for KMY

General

• • outlets > HIP?

INFO

General

• driver-drill
  • total length including bit > 210mm
  • distance shaft center to top of housing > 36mm

hatches and portlights

• Deckhatches:
  • Lewmar Size 60 low profile: 39960030
    • Skyscreens
• Portligths in superstructure:
  • Lewmar Standard portlight Size 3: 393320200
• Portlights in cockpit:
  • Lewmar Standard portlight Size 5: 393520200

walls

• panels > 17-HPH-15 RAL 9010
• round corners > solid teak, varnished

lining

• panels > 12-HPH-10 RAL 9010
• knuckles > permitted, minimum width 300

ceilings

• as Nescio/Pure (15038)
• lighting > EB12/EB/22?flex-05

entrance doors

• panels > RAL 9010
• sliding door system > Husky 100 aluminum
• hinges > Kroon 353241
• mortise lock > Kroon 735831
• handles > bathroom - Foresti & Suardi 480A (Kroon S355945)
• door lock button > bathroom - Foresti & Suardi 481C (Kroon S352419)
• height doorhandles?
• sliding door catch?

lockers

• panels > 12-HPH-10 RAL 9010 and 17-HPH-15 RAL 9010
• round corners > solid teak, varnished
• solid profiles > teak, varnished
• galley > lower cabinets > Alu HPL
• galley > counter top > Marlan 12mm, color tbd
• shelves > mounted with shelf supports Kroon 342354 (Hettich 0053012)
• sliding door system > Husky 50
• hinges > Hettich Intermat Soft 9943 > Kroon 356850 (Hettich 1031071)
• closing device > Kroon 374965
• drawers > proposal by Navyk
• securing ledge > aluminum panel 5mm, make grooves fitting 5mm Al dividers

seats

• seat cushion thickness 120
• back vertical ?

berths

• mattress > thickness 120mm
• ventilation > holes in bed panel

Sole

• base > 18mm ocoume, varnished all around
• finish > teak and holly 60mm > possible Bruynzeel Decora Sole Flooring T.B.D.
• margin boards > no margin boards
• hatch locking device > Southco E5-70-1627-701 + Southco E3-13-4
• sole supports > alu tubing 50x30

Fore Cabin

• bed storage > access from top & side

Salon

• folding table
  • veneered top
  • aluminium pillars diameter 120-180
  • 10mm teak margin around table top
  • hardware

Galley

• Fridge > Frigomatic BI75
• Freezer > Frigomatic BI53 > is it possible to place it under one of the three beds?
• Sink > Exalto 70.01.45
• Stove > Force 10 type (TECHNAUTIC 596122) Force 10 TECHNAUTIC 596122
• Foot pump > Belship 032610
• Faucet >
  • fresh water T.B.D.
  • salt water T.B.D.
• Safe > integrated > yard made of aluminium 5mm (sketch will follow)

Bathroom

• no sink
• shower mixer > T.B.D.
• shower head > T.B.D., can be integrated in ceiling if needed (for head room)
• drain > directly in floor
• mirror > at entrance door
• black water tank > Vetus ATANK 061 > position tbd by Navyk

Aft cabins

• entrance door > sliding door system Hasky 100
• boiler under bed > Webasto Basic 50

Deck house

• aft area of deck house as Nescio/Pure (pillar boxes)
• detailed metal construction for 'laptop tables' aft PS&SB
• hardware folding footrest aft PS&SB - T.B.D.

Superstructure

• Skyscreen
  • type Roller Surface 2 With Seal
  • orientation is transverse sliding

Systems

HVAC

• KMY will provide drawing

Fire fighting

• KMY will provide model and quantity

Electrical system

• Battery > MASTERVOLT MLI Ultra 12/5000 art. nr. 66015000
• Sockets > KMY will provide model and quantity

Safety

• EPIRB
  • KMY will provide model
  • location in recess next to deckhouse entrance

Modeling refereneces

Tolerance

• distance to frame flanges 20

Lining

• deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)

Base ceiling

• superstructure
  • offset 58 from inside shell
  • after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
  • interference with stringers <2, to be solved on board

Milling

• Subcontracted to CNCwerk

Aluminum

• mast bulkhead > cutout entrance door + heater hose
• aft bulkhead > cutout for heater hose
• bolt connection > create detail

People

• Eeuwe Kooi - director/owner (not directly involved)
• Willem Berends - chain manger (responsible for contract)
• Willem-Jan van der Vegt - engineer (our contactperson)
• Haaie Andringa - foreman carpentry