15007 Bestevaer 45 ST Jongedame

From NavykI
Jump to: navigation, search

Jongedame is the second boat from the new 'Pure' line of yachts.

Scope

  • detailed 3D model
  • general detail sheet
  • CNC milling files (for all panel parts, drill holes not included)
  • assembly drawings (with indication for bevels & edgeband)
  • list of hardware & appliances
  • weight brut + net + COG

Planning

  • Delivery W47

TO DO

Parts

Material

  • can we use larger sheet dimensions?

Solid model

General

  • sliding doors lockers > catchers
  • replace solid round corners

Sole

Base sole primary model done

Forecabin

  • entrance door > access carriages + stoppers (door removal)
  • entrance door > shorten top sidee
  • shelf locker > finger catch, position carriages
  • bulkhead > extend topside, ceiling stops

Salon

Galley

  • drawers (including waste bin) > add closing device
  • waste bin > closure for smells
  • doors > add closing device

Bathroom

  • bulkhead saloon > extend topside, ceiling stops
  • cabinet doors > fingerhole + catch
  • cabinet doors > hinges

Aft ship

  • entrance > double check model with KMY
  • air heating > add hose penetrations to panels

Superstructure

  • lining > move inside with 10mm
  • hatches > basepanels 17mm with cork 4mm and edgeband 2mm
  • portlights > basepanels with 4mm cork against aluminum shell
  • skyscreens > add to salon and fore cabin
  • entrance > narrow ceiling cutout conform latest construction model
  • finish ceiling > remove the narrow strip at exterior contour and extend ceiling panels
  • base ceiling + hatch rings > make planar at CL, width as hatch rings
  • base + finish ceiling > everlength 20mm at aft side, at forward end of deckhouse
  • deckhouse > lining > shorten top edge, flush with topside of base ceiling, delete cleat
  • deckhouse > ceiling > adjust in way of entrance
  • deckhouse > lining > mount on basewood, increase window cutouts to 3mm offset from window, add rings (I will ask detail), basewood NOT in our delivery
  • baseceiling > mast bulkhead > stop ceiling, continue bulkheads (bathroom + fore cabin)

Basewood hull

  • portlights > basepanels with 4mm cork

Sole structure

Other files

Overlength

Navyk remarks for KMY

General

Sole structure

  • table mounting?

Fore cabin

Bathroom

  • upper locker doors > no radius at corners? handles?
  • upper locker shelf rims

Galley

  • watermixer
  • safe
  • access fridge?

Salon

Aft ship

  • roller blinds > in model?

INFO

General

  • driver-drill
    • total length including bit > 210mm
    • distance shaft center to top of housing > 36mm
  • NO graphandles
  • spec 500 'bars for hatches' > NOT in scope Navyk

hatches and portlights

  • Deckhatches:
  • Portligths in superstructure:
  • Portlights in cockpit:

hardware

walls

  • panels > 17-HPH-15 RAL 9010
  • round corners > solid teak, varnished

lining

  • panels > 12-HPH-10 RAL 9010
  • knuckles > permitted, minimum width 300

ceilings

  • as Nescio/Pure (15038)
  • lighting > EB12/EB/22?flex-05

entrance doors

  • panels > RAL 9010
  • sliding door system > Husky 100 aluminum
  • hinges > Kroon 353241
  • mortise lock > Kroon 735831
  • handles > bathroom - Foresti & Suardi 480A (Kroon S355945)
  • door lock button > bathroom - Foresti & Suardi 481C (Kroon S352419)
  • height doorhandles?
  • sliding door catch?

lockers

  • panels > 12-HPH-10 RAL 9010 and 17-HPH-15 RAL 9010
  • round corners > plywood, teak veneered
  • solid profiles > teak, varnished
  • galley > lower cabinets > Alu HPL (Alu-poplar-Alu)
  • galley > counter top > Marlan 12mm, color tbd
  • shelves > mounted with shelf supports Kroon 342354 (Hettich 0053012)
  • sliding door system > Husky 50
  • hinges > Hettich Intermat Soft 9943 > Kroon 356850 (Hettich 1031071)
  • closing device > Kroon 374965
  • drawers > HPL white
  • securing ledge > aluminum panel 5mm, make grooves fitting 5mm Al dividers
  • door and drawer grips > finish > edge band
  • ventilation sleeves > finish > paint

seats

  • seat cushion thickness 100
  • back cushion thickness 80 (deck house)

berths

  • mattress > thickness 120mm
  • ventilation > holes in bed panel

Sole

  • base > 18mm ocoume, varnished all around
  • finish > teak and holly 60mm > possible Bruynzeel Decora Sole Flooring T.B.D.
  • margin boards > no margin boards
  • hatch locking device > Southco E5-70-1627-701 + Southco E3-13-4
  • sole supports > alu tubing 50x30

Fore Cabin

  • bed storage > access from top & side

Salon

  • folding table
    • veneered top
    • aluminium pillars diameter 120-180
    • 10mm teak margin around table top
    • hardware
  • NO e-panel
  • Safe > in SB bench under sole > integrated > yard made of aluminium 5mm (sketch will follow)

Galley

Bathroom

  • no sink
  • shower mixer > T.B.D.
  • shower head > T.B.D., can be integrated in ceiling if needed (for head room)
  • drain > directly in floor
  • mirror > at entrance door
  • black water tank > Vetus ATANK 061 > position tbd by Navyk

Aft cabins

  • entrance door > sliding door system Hasky 100
  • boiler under bed > Webasto Basic 50 > CANCELED (will be outside interior)

Deck house

  • aft area of deck house as Nescio/Pure (pillar boxes)
  • chart tables > folding footrests by KMY
  • chart tables > border of alu

Superstructure

  • Skyscreen
    • type Roller Surface 2 With Seal
    • orientation is transverse sliding

Systems

HVAC

  • KMY will provide drawing

Fire fighting

  • KMY will provide model and quantity

Electrical system

  • Battery > MASTERVOLT MLI Ultra 12/5000 art. nr. 66015000
  • Sockets > Jung stainless steel mat ES 1520 NKI

Safety

  • EPIRB MT403
    • location in recess next to deckhouse entrance

Modeling refereneces

Tolerance

  • distance to frame flanges 20

Lining

  • deckhouse > offset 62 from inside shell, lining will be glued against Hora windowframes conform P169 Detail windows.dwg (received June 30)

Base ceiling

  • superstructure
    • offset 58 from inside shell
    • after rebuilding salon tolerance <7 (surface from aft bulkhead to fwd bulkhead)
    • interference with stringers <2, to be solved on board

Sheet estimation

Milling

Aluminum

  • mast bulkhead > cutout entrance door + heater hose
  • aft bulkhead > cutout for heater hose
  • bolt connection > create detail

People

  • Eeuwe Kooi - director/owner (not directly involved)
  • Willem Berends - chain manger (responsible for contract)
  • Willem-Jan van der Vegt - engineer (our contactperson)
  • Haaie Andringa - foreman carpentry

Exchange work

As discussed

Structure model - modifications!