Approval drawing

From NavykI
Jump to: navigation, search

Note: If attaching a planar group via ShipConstructor fails, then use AutoCad Xref » Attach


Rules[edit]

  • Use correct layout template
  • Current layer: Defpoints
  • Color for layer Defpoints: magenta
  • In modelspace show the layout on the correct scale, layer Defpoints
  • Layout names ‘Sheet 1’, ‘Sheet 2’, etc.
  • Fill up title block at least with:
    • Date
    • Scale
    • Format
    • Sheet number and total
  • Viewports
    • Scale (in order of preference):
      • 1:20
      • 1:25
      • 1:40
    • Scale for details:
      • 1:2
      • 1:5
    • Layer is VP (layersetting NO PLOT for VP)
    • Lock display of viewports
  • Titleblock KP:
    • Hull nr: -
    • Project nr: KP project code
    • Drawn: JK
    • Drawing nr: B08 for expansions
  • Text
    • Layer 0
    • Textstyle KP
    • Colour ‘by layer’
    • Textheight: (lay out)
      • Title 7.5 CAPITALS
      • Subtitle 5 No capitals
    • Text 2.5


Guidelines[edit]

  • Arrange planar groups in the following order:
    • 1. Frames
    • 2. Longitudinals
    • 3. Decks
    • 4. Curved plate
  • Small projects: arrange planar groups vertically conform their position in reality; place the keel on the bottom of the drawing, place roofs on top of the drawing
  • Arrange small parts (brackets, etc.) near the adjacent part


Check[edit]

  • Presence of all planar groups
  • Correct layer use
  • Undesired layers


Bound approval drawing for SC2005[edit]

  • 1.Make sure the approval drawing is completely arranged and saved
  • 2.Click Approval » Save As Bound Approval
  • 3..Location Project » Drawings
  • 4.Name is ‘project Approval date’ (08025 Approval 14-08-2008.dwg)
  • 5.Click Yes for ‘Remove all solids’
  • 6.Bind planar groups which cannot be bound with Shipconstructor (many times ‘crv plate’ groups) manually via ‘xref’ / bind
  • 7.Use Quick Select (Propereties window) to:
    • •Explode all block references
    • •Explode all ARLCMarklines
    • •Delete all ARLDDoubleCurveSurfaces
    • •Delete all unnecessary layers
  • 8.Move all entities to the ‘0’-layer.
  • 9.Purge the drawing
  • 10.Move viewports to layer ‘VP’ and switch the layer off
  • 11.Check for undesired layers


Bound approval drawing for SC2011[edit]

  • 1.Check correct settings for: SC APPROVAL » STRUCTURE DRAWING OPTIONS

Structuredrawingoptions.jpg

  • 2.Make sure the approval drawing is completely arranged and saved
  • 3.Click SC Approval » Save As Bound Approval...
    • Load : H:\Documents and Settings\ShipConstructor\ShipConstructor 2011\Bound approval settings.txt
  • 4.Location Project » Our files
  • 5.Name is ‘project Approval date’ (08025 Approval 14-08-2008.dwg)
  • 6.Use Quick Select (Properties window) to:
    • •Explode all block references
    • •Delete all unnecessary layers
      • _Draft_Cut
      • _Draft_Mark
      • _Extracted_Part
      • _Extracted_Part_Solids.
  • 7.Activate only 'OVERKILL' layer.
  • 8.Run Overkill command for all entities on 'OVERKILL' layer at once and make sure you use the correct settings

Overkillcommand.jpg

  • 9.Move all entities to the ‘0’-layer.
  • 10.Check correct colors.
  • 11.Purge the drawing
  • 12.Move viewports to layer ‘VP’ and switch the layer off
  • 13.Check for undesired layers