Difference between revisions of "Schutte"
From NavykI
(→Procedure) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 21: | Line 21: | ||
**SC entities | **SC entities | ||
**all other info outside the plate contour | **all other info outside the plate contour | ||
| + | **profile markings | ||
== Checklist == | == Checklist == | ||
| − | * vertices - when too dense, increase tolerance | + | * vertices - when too dense, increase tolerance for that contour only, then trim adjacent marking lines where necessary |
* double lines (marking lines on top of contour) | * double lines (marking lines on top of contour) | ||
* marking lines extending beyond plate contour | * marking lines extending beyond plate contour | ||
Latest revision as of 10:02, 8 December 2011
Schutte is a cutting company from NL with special requirements regarding the delivery of the nest drawings.
IMPORTANT: Their CNC cutting machine does NOT accept double lines or marking lines passing through contours.
Contents
Delivery[edit]
For each plate:
- 1 DXF cutting file per plate
- 1 nest drawing in PDF format on A4, text must be readable so select only the plate + header
Procedure[edit]
- export each nest to NC-pyros
- plate contour: default color
- part contours (inside AND outside) - color white, closed contour
- marking lines - blue
- remove:
- vertices
- text
- piecemarks
- bending info
- orientation icons
- SC entities
- all other info outside the plate contour
- profile markings
Checklist[edit]
- vertices - when too dense, increase tolerance for that contour only, then trim adjacent marking lines where necessary
- double lines (marking lines on top of contour)
- marking lines extending beyond plate contour
NOTE: when tolerance is reduced many marking lines will extend beyond contour, check and trim
Note[edit]
- use default layers (machine is picking contours by color, not by layer)
- machine code is created with CAM 2000 software
- Schutte does not have AutoCad so they cannot make any modifications to our files (or solve problems)
- make sure no marking lines are outside or on part contours because then their software cannot create the machine code
- usual profile end markings give the problems, find them by filtering on closed polyline (the triangle shapes) and length 37.5 (the 'L' shapes)
- for examples see most Bronsveen projects
