Difference between revisions of "Approval drawing"

Revision as of 13:01, 14 March 2011

Note: If attaching a planar group via ShipConstructor fails, then use AutoCad Xref » Attach

Use correct layout template
Current layer: Defpoints
Color for layer Defpoints: magenta
In modelspace show the layout on the correct scale, layer Defpoints
Layout names ‘Sheet 1’, ‘Sheet 2’, etc.
Fill up title block at least with:
- Date
- Scale
- Format
- Sheet number and total
Viewports
- Scale (in order of preference):
  - 1:20
  - 1:25
  - 1:40
- Scale for details:
  - 1:2
  - 1:5
- Layer is VP (layersetting NO PLOT for VP)
- Lock display of viewports

Titleblock KP:
- Hull nr: -
- Project nr: KP project code
- Drawn: JK
- Drawing nr: B08 for expansions

Arrange planar groups in the following order:
- 1. Frames
- 2. Longitudinals
- 3. Decks
- 4. Curved plate
Small projects: arrange planar groups vertically conform their position in reality; place the keel on the bottom of the drawing, place roofs on top of the drawing
Arrange small parts (brackets, etc.) near the adjacent part

1.Make sure the approval drawing is completely arranged and saved
2.Click Approval » Save As Bound Approval
3..Location Project » Drawings
4.Name is ‘project Approval date’ (08025 Approval 14-08-2008.dwg)
5.Click Yes for ‘Remove all solids’
6.Bind planar groups which cannot be bound with Shipconstructor (many times ‘crv plate’ groups) manually via ‘xref’ / bind
7.Use Quick Select (Propereties window) to:
- •Explode all block references
- •Explode all ARLCMarklines
- •Delete all ARLDDoubleCurveSurfaces
- •Delete all unnecessary layers
8.Move all entities to the ‘0’-layer.
9.Purge the drawing
10.Move viewports to layer ‘VP’ and switch the layer off
11.Check for undesired layers

Navyk Structure_drawing_options.JPG.

1.Make sure the approval drawing is completely arranged and saved
2.Click Approval » Save As Bound Approval
3..Location Project » Drawings
4.Name is ‘project Approval date’ (08025 Approval 14-08-2008.dwg)
5.Click Yes for ‘Remove all solids’
6.Bind planar groups which cannot be bound with Shipconstructor (many times ‘crv plate’ groups) manually via ‘xref’ / bind
7.Use Quick Select (Propereties window) to:
- •Explode all block references
- •Explode all ARLCMarklines
- •Delete all ARLDDoubleCurveSurfaces
- •Delete all unnecessary layers
8.Move all entities to the ‘0’-layer.
9.Purge the drawing
10.Move viewports to layer ‘VP’ and switch the layer off
11.Check for undesired layers

@@ Line 59: / Line 59: @@
-== Bound approval drawing ==
+== Bound approval drawing for SC2005==
 *1.Make sure the approval drawing is completely arranged and saved
@@ Line 77: / Line 77: @@
 *11.Check for undesired layers
+== Bound approval drawing for SC2011==
+*1.Check correct settings for: SC APPROVAL » STRUCTURE DRAWING OPTIONS
+[[Image:H:\Documents and Settings\Navyk-I image library\Structure_drawing_options.JPG|thumb|center|alt=A Structure drawing options|Navyk ''[[Structure_drawing_options.JPG]]''.]]
+*1.Make sure the approval drawing is completely arranged and saved
+*2.Click Approval » Save As Bound Approval
+*3..Location Project » Drawings
+*4.Name is ‘project Approval date’ (08025 Approval 14-08-2008.dwg)
+*5.Click Yes for ‘Remove all solids’
+*6.Bind planar groups which cannot be bound with Shipconstructor (many times ‘crv plate’ groups) manually via ‘xref’ / bind
+*7.Use Quick Select (Propereties window) to:
+**•Explode all block references
+**•Explode all ARLCMarklines
+**•Delete all ARLDDoubleCurveSurfaces
+**•Delete all unnecessary layers
+*8.Move all entities to the ‘0’-layer.
+*9.Purge the drawing
+*10.Move viewports to layer ‘VP’ and switch the layer off
+*11.Check for undesired layers
 [[Category: ShipConstructor]]